Overview
The Oracle Lighting 2012-001 is a white pre-wired flush mount LED switch with an on/off push-button action. Its housing uses a heavy-duty brass assembly with a nickel-plated finish, and it gives a click you can feel when the switch engages.
It suits owners who want a tidy, pre-wired control for an illuminated interior accessory. No vehicle years, makes or models apply, so it is treated as universal fit. Check the panel opening and wiring before ordering.
Key features
- Pre-wired terminal for simpler installation
- Flush-mount design
- Heavy-duty brass assembly
- Nickel-plated finish
- Click you can feel when engaged
Panel prep and cutout
Flush-mount switches depend on a clean opening. Mark the cutout on the panel from the back side where possible, drill a pilot hole, and then trim to the outline with a file or hole saw. Smooth the edges so the housing seats without binding, and check that the panel is supported behind the opening so it does not flex when the switch is pressed.
Consider the wiring before you cut. The pre-wired terminal needs room behind the panel, so look for obstructions such as brackets, harnesses or ducting. A short test fit with the switch in place shows whether the nut or retaining ring can be tightened properly.
- Drill a pilot hole before the final cut
- Support the panel behind the opening
- Check for clearance behind the panel
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 2012-001 |
| UPC | 201200120141 |
| Illumination color | White |
| Switch type | On/off push button |
| Assembly | Heavy-duty brass |
| Finish | Nickel-plated |
Vehicle fitment
Universal fit, so no year, make, model or trim is matched to it. Measure your panel opening before buying.
No vehicles are named, so there are no close models to rule out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pre-wired terminal needs a power and switched-circuit connection. No wiring diagram is included, so fuse the feed and confirm the circuit before connecting it to the switch.
What’s included
One pre-wired white on/off flush mount LED switch. No other hardware is named.
Not included: A mounting hole cut in the panel to suit the flush housing.









