Overview
The Oracle Lighting 2012-005 is an amber pre-wired on/off flush mount LED switch for 12-volt circuits that mounts through a 16MM hole. Its power ring takes on an amber tone when the switch is activated, so the on state stands out in a dim cabin.
Drivers and builders adding simple illuminated controls to an interior panel will find it a straightforward choice for that job. Pre-wired terminals spare you cutting and splicing loose leads. No vehicle years, makes or models are named, so treat it as a universal fit switch.
Key features
- Amber / orange glowing power ring
- Pre-wired terminal for quicker hookup
- Flush mounts through a 16MM hole
- Heavy-duty brass housing with a positive click when engaged
- Durable nickel plate finish; CE compliant
Troubleshooting a dead switch
When a flush switch stops working, start with the simplest checks before replacing anything. Confirm the 12-volt feed is present at the pre-wired terminal, check that the fuse is intact, and make sure the ground path is clean. A missing power ring often points to supply or connection trouble rather than a failed switch.
If the ring lights but the circuit does not respond, the problem may lie in the controlled device or its wiring. Test the load separately, look for chafed insulation where the leads pass through the panel, and reseat any connectors. Replace the switch only after the supply and wiring are confirmed sound. Keep a note of wire colors during removal so reinstallation is straightforward. Recheck the connections once the panel is back together.
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 2012-005 |
| UPC | 2001200520149 |
| Illumination color | Amber / Orange |
| Switch type | Push button, on/off |
| Operating voltage | 12 volts |
| Mounting hole | 16MM |
| Assembly | Heavy-duty brass |
| Finish | Durable nickel plate |
| Waterproof | No |
| Certification | CE compliant |
Vehicle fitment
The switch is universal fit, so it is not matched to a particular year, make, model or trim. Whether it works in your vehicle depends on your panel and a 16MM opening.
There are no close models to rule out because none are named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the pre-wired terminal only after the 12-volt feed is fused and the control circuit is identified. A clean 16MM cutout lets the flush housing seat fully.
What’s included
One pre-wired amber on/off flush mount LED switch. No additional hardware is named.
Not included: The 16MM mounting hole in the panel.









