Overview
The Omix-ADA 16723.14 is a rear right (passenger side) drum brake wheel cylinder for vintage Willys and Jeep trucks, including the FC150 and FC170 forward-control models and the Willys 1-Ton, Panel and Sedan Delivery. The wheel cylinder is the hydraulic piston that pushes the brake shoes outward against the drum.
This is a direct fit replacement from Omix-ADA, built to the original specifications for restorers who want the correct part on a classic Willys.
Key features
- Rear right wheel cylinder for drum brakes
- Direct fit, with no modification listed
- Covers FC150, FC170, FC170HD and early Willys trucks
- Made to the original specifications.
Forward-control and Willys truck brakes
Forward-control trucks such as the FC models use drum brakes that work much like those on passenger Jeeps, but the cylinder, shoe and drum sizes are different. A wheel cylinder pushes the shoes against the drum, so a leak at the boot or bore shows up as a low pedal or fluid on the shoes. Owners of these trucks often find the brake lines and master cylinder as old as the cylinders.
Before replacing a cylinder, check that the drum and shoes are in good shape, since a worn lining can wear a new piston unevenly. Bleed the system with fresh fluid and clean the backing plate. Old steel lines can rust through near the fittings, so inspect them while the wheel is off and keep a spare set of fittings on hand.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16723.14 |
| UPC | 804314011444 |
| Part type | Drum brake wheel cylinder |
| Position | Rear right, passenger side |
| Fit type | Direct fit |
| Warranty | It carries a limited five-year warranty. |
Vehicle fitment
The listed applications are the 1958–1963 Jeep FC150, the 1963 FC170 and FC170HD, the 1948–1955 Willys 1-Ton, the 1948–1950 Willys Panel and the 1951–1955 Willys Sedan Delivery.
CJ models and later Jeep trucks are not on the list for this cylinder. Confirm your vehicle’s year, model and trim before ordering.









