Overview
The Omix-ADA 16722.08 is a front wheel cylinder for 10 inch brakes on the 1966–1971 CJ5 and CJ6 and the 1966–1968 CJ5A and CJ6A. It can be used on the driver or passenger side.
It is built as a direct OE replacement to the original specifications.
Check the drums before choosing this cylinder, since it is made for 10 inch brakes.
Key features
- Front wheel cylinder
- For 10 inch brakes
- Driver or passenger side
- Direct OE replacement
Checking brake size first
Brake size is the first thing to confirm with a wheel cylinder. A drum of a different diameter uses different shoes and cylinder bores, so a cylinder that looks close can still fail to seat correctly. Measure the drum diameter, or read the existing shoes, before ordering. Matching the size avoids uneven braking and shoe contact problems.
Front cylinders on drum brakes wear from heat, moisture and pedal cycles. Inspect the boot and piston for leaks and scoring, and look for fluid on the backing plate. Replace the brake hose if it is cracked, and bleed the brakes after installation so no air stays in the lines. Front and rear cylinders often work as a set, so check both ends while the drum is off.
- Measure the drum diameter before ordering
- Check the boot for tears
- Look for fluid on the backing plate
- Bleed the brakes after fitting
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16722.08 |
| UPC | 804314020989 |
| Product type | Drum brake wheel cylinder |
| Position | Front |
| Brake size | 10 inch |
| Side | Driver or passenger |
| Fit type | Direct fit |
| Warranty | Limited five years |
Vehicle fitment
It fits the 1966–1971 CJ5 and CJ6 and the 1966–1968 CJ5A and CJ6A.
CJ models before 1966 and the CJ7 are not on the list. Confirm your vehicle’s year, model and trim before ordering.









