Overview
The Omix-ADA 16722.12 is a passenger-side front wheel cylinder for the 1958–1963 Jeep FC150, the 1963 FC170 and FC170HD, and the Willys 1-Ton, Panel and Sedan Delivery.
It pairs with the driver-side cylinder 16722.11.
The 16722.12 sits on the right side only, which makes it half of a left and right pair.
Key features
- Front passenger-side wheel cylinder
- Direct OE replacement
- Forward-control and Willys application
Working with cylinder pairs
Front wheel cylinders on older Jeep and Willys trucks work as a left and right pair. Each side carries its own piston and boot, and the two must be matched to the same drum and shoe setup. When one side is replaced, check the other, since it has seen the same heat and moisture over the same period.
Passenger-side and driver-side cylinders are not interchangeable by position, so label the old parts or match the mounting location before buying. Replace the brake hose if it is cracked, and bleed the system after installation. Check the drum and shoes for wear at the same time, and use fresh brake fluid rather than old fluid from the reservoir.
- Match the side before buying
- Check the opposite cylinder for leaks
- Inspect the brake hose for cracks
- Bleed the system after fitting
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16722.12 |
| UPC | 804314011468 |
| Product type | Drum brake wheel cylinder |
| Position | Front, passenger side |
| Fit type | Direct fit |
| Warranty | Limited five years |
Vehicle fitment
It fits the 1958–1963 FC150, the 1963 FC170 and FC170HD, the 1948–1955 Willys 1-Ton, the 1948–1950 Willys Panel and the 1951–1955 Willys Sedan Delivery.
CJ models are not on the list. Confirm your vehicle’s year, model and trim before ordering.









