Overview
The Omix-ADA 16722.09 is a front left (driver side) drum brake wheel cylinder for the 1972–1977 Jeep CJ5, the 1972–1975 Jeep CJ6 and the 1976–1977 Jeep CJ7. A wheel cylinder is the hydraulic part that pushes the brake shoes against the drum.
These parts are direct OE replacement Jeep parts built to the original specifications. The wheel cylinder carries a limited five year warranty.
A wheel cylinder sits inside a drum brake at each wheel, and this one mounts at the front left. The CJ5, CJ6 and CJ7 fits cover different year spans (1972–1977, 1972–1975 and 1976–1977), so match your Jeep’s model year before choosing the part. Confirm the cylinder bore size against the part being replaced.
Key features
- Front left (driver side) drum brake wheel cylinder
- Direct OE replacement, built to the original specifications
- For the 1972–1977 CJ5
- For the 1972–1975 CJ6
- For the 1976–1977 CJ7
- Limited five year warranty
Bleeding and checking the brakes
A wheel cylinder converts hydraulic pressure into the push that moves the brake shoes, so its seals and bore determine how firmly the pedal responds. When a cylinder begins to leak, fluid can collect on the inside of the drum or backing plate, and the pedal may sink or feel soft. Inspect the boot and the area around the cylinder during any brake service.
Front and rear cylinders are often inspected together, since brake fluid and wear affect the whole system. Use fresh brake fluid of the type the vehicle requires, and bleed the system in the correct order after replacing a cylinder. After the work, test the pedal feel and check the wheels for drag before driving normally.
- Fluid on the inside of the drum or backing plate
- Soft or sinking pedal feel
- Torn or cracked rubber boot
- Brake shoes that drag after adjustment
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16722.09 |
| UPC | 804314041236 |
| Product type | Drum brake wheel cylinder |
| Position | Front left (driver side) |
| Fitment | Direct fit |
| Warranty (per Omix-ADA) | Limited five year |
Vehicle fitment
It fits these vehicles:
- 1972–1977 Jeep CJ5 (Base, Golden Eagle, Renegade)
- 1972–1975 Jeep CJ6 (Base)
- 1976–1977 Jeep CJ7 (Base, Golden Eagle, Renegade)
Each line gives the model years, make and model, and the trims in parentheses.
This cylinder is for the driver side only. It fits the CJ5 for 1972–1977, the CJ6 for 1972–1975 and the CJ7 for 1976–1977. Confirm the year, model and trim against your vehicle before ordering.
Installation notes
Brake components are safety-critical, so professional installation is recommended. Follow the torque specifications and bleed or adjust the brake system as service information requires, then test the brakes at low speed in a safe area.
What’s included
One front left (driver side) wheel cylinder.









