Overview
The Omix-ADA 16723.08 is a passenger-side rear wheel cylinder for 11 x 2 brakes with a 15/16 inch inside diameter. It fits the 1972–1975 CJ and the 1972–1974 CJ5 and CJ6.
The cylinder does not include the self-adjusting hardware kit.
Key features
- Rear passenger-side wheel cylinder
- For 11 x 2 brakes
- 15/16 inch inside diameter
- Direct OE replacement
Adjusters and shoe hardware
A self-adjusting drum brake relies on its hardware to keep the shoes close to the drum. When a new cylinder moves the shoes, a seized or worn adjuster can leave the pedal high or uneven, so the adjuster should be checked during the same job. Clean the threads and pivot points, and confirm the star wheel turns freely before reassembly.
Old shoe springs stretch with age and can hold the shoe away from the backing plate, which affects how the cylinder pushes. Replace springs that look stretched or kinked. Use a light coat of high-temperature brake grease on contact points, not on the friction surface. After assembly, pump the pedal several times with the wheel off the ground before lowering it. Recheck the adjustment after a few stops.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16723.08 |
| UPC | 804314041250 |
| Product type | Drum brake wheel cylinder |
| Position | Rear, passenger side |
| Brake size | 11 x 2 |
| Inside diameter | 15/16 inch |
| Fit type | Direct fit |
| Warranty | Limited five years |
Vehicle fitment
It fits the 1972–1974 Jeep CJ5 and CJ6, and it fits 1972–75 CJ models with 11 x 2 brakes.
Models with other brake sizes are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel cylinder only.
Not included: The self-adjusting hardware kit.









