Overview
The Omix-Ada 18018.09 is a steering shaft bearing nut coupling spring for Jeep CJ5, CJ7 and Scrambler vehicles, covering the 1976 to 1986 CJ models and the 1981 to 1985 Scrambler. It is a direct OE replacement, and one spring is needed.
It is built to original specifications and comes with a limited five-year warranty.
Key features
- Built to original Jeep specifications by Omix-Ada
- Direct fit labeled for CJ5, CJ7 and Scrambler models
- One spring needed per vehicle
- Five-year limited warranty from the manufacturer
Why the spring matters
The nut coupling spring holds the bearing nut under tension so the steering shaft stays seated. As the spring fatigues, the nut can back off slightly, letting the shaft shift and introducing play at the wheel. Because the spring is small and inexpensive, it is often replaced whenever the column bearing is serviced.
When fitting a new spring, check that the nut seats evenly and that the spring sits the same way the old one did. Inspect the surrounding threads and the bearing for wear before reassembly, since a worn nut can cause the same play as a tired spring. Keep the threads clean so the torque reading is accurate.
On older CJ and Scrambler steering columns, the spring is one part of a small set of coupling components. With the column apart is the right time to clean the area, look for cracks, and confirm the wheel turns freely before reinstalling the column cover.
- Check the nut for thread wear
- Inspect the spring for cracks or flat coils
- Confirm the bearing turns freely
- Retorque after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18018.09 |
| UPC | 804314024666 |
| Type | Steering shaft bearing nut coupling spring |
| Quantity needed | 1 |
| Warranty | Limited five-year warranty |
Vehicle fitment
The manufacturer fitment list names these vehicles:
- Jeep CJ5, 1976 through 1983, with Base, Golden Eagle, Laredo, Limited and Renegade trims
- Jeep CJ7, 1976 through 1986, with Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims
- Jeep Scrambler, 1981 through 1985, with Base, Laredo, Renegade, SL and SR trims
Cherokee models and the Wrangler YJ are not covered. Check your year and model against these entries before ordering.
What’s included
The spring is needed in a quantity of one per vehicle. No other hardware is named as included.









