Select your vehicle

Omix-ADA Steering Bell Crank Repair Kit – 18042.03

Omix-Ada

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Omix-ADA 18042.03 steering bell crank repair kit with a 7/8 inch shaft
  • Fitment list covers 1959–1960 Jeep CJ3, CJ5 and CJ6 models
  • Covers Willys CJ-2, CJ-3, CJ-5 and CJ-6 models from 1949 to 1958

Description

Overview

The Omix-ADA 18042.03 is a steering bell crank repair kit for early Jeep CJ and Willys CJ models. It covers the 1959–1960 Jeep CJ3, CJ5 and CJ6, the 1949 Willys CJ-2, the 1949–1958 Willys CJ-3, the 1955–1958 Willys CJ-5 and the 1956–1958 Willys CJ-6.

It is a direct OE replacement built to the original specifications. It is designed for a 4 cylinder engine application and uses a 7/8 inch shaft, with a limited five year warranty.

Key features

  • Steering bell crank repair kit
  • 7/8 inch shaft
  • Direct OE replacement built to original specifications
  • 4 cylinder engine application

Steering linkage inspection

The bell crank sits in the steering linkage, so play in it shows up as vague steering or a wandering front end. Before beginning a repair, raise the front and check the crank for movement by hand, then look at the bushings and the arm where it joins the drag link. Wear in one part often shows up in others, so check the whole linkage.

When fitting new parts, clean the bores and mating faces, and tighten fasteners evenly to the torque your vehicle requires. Use new cotter pins and locking hardware where the design calls for them. After the repair, test the steering at low speed in an open area before driving normally.

  • Look for grease seepage around the seals
  • Check that the arm moves freely without binding
  • Recheck fasteners after the first few drives

Specifications

Brand Omix-ADA
Part number 18042.03
Part type Steering bell crank repair kit
Shaft size 7/8 inch
Engine 4 cylinder
Warranty Limited five year manufacturer warranty
Fitment type Direct fit

Vehicle fitment

Coverage runs across the 1959–1960 CJ3, CJ5 and CJ6 and the 1949–1958 Willys CJ-3, with the Willys CJ-2, CJ-5 and CJ-6 models from the same era.

Jeep CJ5 and CJ6 years from 1961 onward, and CJ7 models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the kit contents against your steering bell crank before starting the repair.

Fitment

VehicleYearsTrims
Jeep CJ31959–1960Base
Jeep CJ51959–1960Base
Jeep CJ61959–1960Base
Jeep Willys CJ-21949All
Jeep Willys CJ-31949–1958All
Jeep Willys CJ-51955–1958All
Jeep Willys CJ-61956–1958All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Omix-ADA 18042.03 fit a 1958 Willys CJ-3?

Yes. The 1949–1958 Willys CJ-3 is covered, so a 1958 model falls within the covered years. Confirm fit for your vehicle's year, model and trim before ordering.

Is this kit a direct replacement for the original part?

Yes. It is a direct OE replacement built to the original specifications, with a 7/8 inch shaft and a 4 cylinder engine application.

How long is the warranty?

It carries a limited five year warranty. Read the coverage terms before ordering, since they set what is replaced if a part fails.

What are the signs the bell crank is wearing?

Loose or vague steering, a clunk when turning at low speed, and uneven tire wear can all point to worn linkage. Grease leaking from seals and visible play at the crank arm are also signs. Inspect the crank and its bushings before deciding whether the repair kit is needed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon