Overview
The Omix-ADA outer bellcrank boot, part 16919.18, is a replacement clutch bellcrank boot for 1972–1983 Jeep CJ5, 1972–1975 CJ6, 1976–1986 CJ7 and 1981–1985 Scrambler models.
The boot fits over the outer end of the clutch bellcrank. Omix-ADA builds it to the original specifications as a direct OE replacement, so it is intended for owners restoring the factory look and protection of the linkage.
Key features
- Outer clutch bellcrank boot
- Direct OE replacement built to original Jeep specifications
- Listed across four CJ and Scrambler model groups
- Omix-ADA part number 16919.18
Protecting the clutch linkage
The bellcrank boot covers the outer end of the clutch linkage and keeps road dirt, water and grit away from the pivot. Without a sound boot, debris can work into the bellcrank and bushings and accelerate wear. Corrosion at the pivot can also make the clutch feel stiff or uneven over time.
Check the boot for splits, hardening, or a seal that has pulled away from the bellcrank. A boot that is torn or loose should be replaced rather than patched, since patches rarely keep out moisture. When the boot is replaced, clean and grease the bellcrank surfaces it covers so the new boot starts out with a clean seal, and inspect the bushings beneath it.
- Look for splits or hardened rubber
- Replace a torn boot instead of patching it
- Clean the bellcrank before fitting the new boot
- Check the bushings beneath the boot
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16919.18 |
| UPC | 804314023041 |
| Product type | Outer clutch bellcrank boot |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5, the 1972–1975 Jeep CJ6, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
Years or models not named in this list, including the Wrangler, are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is a single outer boot. Clips or other hardware may be needed, so check the parts against your installation before starting.









