Overview
The Omix-Ada power steering return hose, part number 18014.02, is a 6 cylinder engine return hose for the 1980–1983 Jeep CJ5, 1980–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler.
The hose installs in the gear to pump position and uses O-ring style hose fittings. It is a direct fit design for the vehicles below, so the fitting style and position are the main checks before installation.
Key features
- Power steering return hose for 6 cylinder engines
- Gear to pump position
- O-ring style hose fittings
- Direct fit design
- Omix-Ada brand, part number 18014.02
Return line basics
A return line carries fluid from the steering gear back to the pump at lower pressure than the pressure side of the system. Because it handles less load, leaks here often show up first as a drop in fluid level and a noisy pump. Inspect the line for softening, cracks and seepage, especially where it passes close to heat sources or moving parts on an older CJ.
When fitting a new return hose, seat the O-ring ends squarely and avoid forcing the connection. Once the system is filled, turn the wheel from lock to lock with the engine running to clear air, then recheck the reservoir level and look for seepage at each fitting. Keep the old hose until the new one is confirmed leak-free.
- Inspect both ends of the hose at every fluid service
- Look for rubbing near the frame or linkage
- Check the reservoir level after the first drive
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18014.02 |
| UPC | 804314036669 |
| Part type | Power steering return hose |
| Engine | 6 cylinder |
| Position | Gear to pump |
| Fitting style | O-ring style hose fittings |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for this hose covers the following vehicles, with trim names as given:
- 1980–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1980–1986 Jeep CJ7 (Base, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
Other Jeep models, such as the Wrangler (YJ) and Cherokee (XJ), and CJ or Scrambler years outside the ranges above are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fittings are O-ring style, so check that the hose ends seat correctly on the steering gear and pump connections before tightening.
What’s included
A power steering return hose, Omix-Ada part number 18014.02.
Not included: Check the clamps and other hardware against your installation before starting.









