Overview
The Crown Automotive J5363661 is a power steering pressure hose for 4.2L engines in the 1982-1983 Jeep CJ5, the 1982-1986 Jeep CJ7 and the 1982-1985 Jeep Scrambler. The pressure hose carries high-pressure fluid from the power steering pump to the steering gear.
The hose is a direct-fit replacement for vehicles with the 4.2L engine, so a vehicle with a different engine is not covered. Compare the old hose with the new one before installation, since hose length, fitting size and routing vary between setups.
Key features
- Power steering pressure hose
- For vehicles with the 4.2L engine
- Direct fit
- Fitment list covers the CJ5, CJ7 and Scrambler
- Replacement part for Jeep vehicles from Crown Automotive
Signs of a worn steering hose
A power steering pressure hose works under constant pressure and near engine heat, so its rubber and fittings age over time. Wet spots at the crimped ends, a swollen section of hose or a cracked outer cover are typical signs that it needs replacing. Small seeps often grow, and a failed hose can dump fluid quickly and leave the steering heavy.
Because the hose connects to the pump and gear, the rest of the system matters too. Pump noise, a low fluid level or fluid that looks dark can point to a problem elsewhere. Replacing the hose is a good time to check the clamps, the fluid and the lines that run alongside it for rubbing or heat damage.
- Look for seepage at both fittings and along the hose body
- Check the hose cover for cracks, bulges or hardened sections
- Inspect nearby clamps and brackets for rubbing
- Refill with fresh fluid after the new hose is in place
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5363661 (also sold as CROJ5363661) |
| UPC | 848399065138 |
| Product type | Power steering pressure hose |
| Engine | 4.2L |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Crown Automotive J5363661 includes:
- 1982–1983 Jeep CJ5 (Base, Laredo, Limited, Renegade)
- 1982–1986 Jeep CJ7 (Base, Laredo, Limited, Renegade)
- 1982–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
It fits the 1982–1983 Jeep CJ5, 1982–1986 CJ7 and 1982–1985 Scrambler with the 4.2L engine only. It does not fit later Wranglers, the Cherokee or other models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Power steering hoses are part of the steering system, so professional installation is a sound choice. Relieve system pressure, keep the fittings clean, and tighten fittings to the factory torque values.
Refill the power steering fluid, bleed the system as directed, and check for leaks with the engine running. Re-check the hose, fittings and fluid level after the first miles of driving, and route the hose away from heat and moving parts.
What’s included
- Power steering pressure hose
Not included: power steering fluid, clamps or seals.









