Overview
The Crown Automotive 4637915 is a power steering pressure hose for the 4.0L 6 cylinder engine. The manufacturer fitment list names the 1991–1996 Jeep Cherokee (XJ) in the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
Compare the hose with the one you are replacing before fitting it. The hose is identified by its engine and the Crown Automotive part number.
Key features
- Power steering pressure hose
- Fits the 4.0L 6 cylinder engine
- Fits 1991–1996 Jeep Cherokee (XJ)
- Crown Automotive replacement part
Pressure hose wear and routing
A power steering pressure hose carries fluid under high pressure from the pump toward the steering gear. Over time, heat, age and vibration can soften the hose wall, crack the rubber or loosen a crimped fitting. Because the hose is under load whenever the steering is turned, small wear can turn into a leak quickly if it is left alone.
Good routing keeps the hose clear of brackets, moving linkage and the exhaust. Check the path of the hose when the steering is turned fully in each direction, and look for points where it rubs. Replace the hose if it shows wet spots, bulges or soft sections, and check the fluid level after the new hose is installed.
- Look for wet spots along the hose length
- Check crimped fittings for seepage or residue
- Confirm the hose clears brackets through full lock
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4637915 |
| UPC | 848399005301 |
| Part type | Power steering pressure hose |
| Engine | 4.0L 6 cylinder |
Vehicle fitment
The manufacturer fitment list names the 1991–1996 Jeep Cherokee (XJ) (Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport).
Cherokee models outside 1991–1996 and other Jeep models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Compare hose length, fittings and line material with the hose you are replacing before installing.









