Overview
The Omix-Ada power steering pressure hose, part number 18012.01, is the line that feeds the steering gear on 1976–1979 Jeep CJ5 and CJ7 models with 6 or 8 cylinder engines. Its position is to gear.
The hose has flared fittings on the end of the line. It fits Base, Golden Eagle and Renegade trims on both the CJ5 and the CJ7.
Key features
- Flared fittings on the end of the line
- Works with 6 or 8 cylinder engines
- Position is to gear
- Fits 1976–1979 CJ5 and CJ7 in Base, Golden Eagle and Renegade trims
Matching flared connections
Flared fittings seal by pressing a cone-shaped end against a matching seat, so the flare has to be clean, round and free of cracks before the nut is tightened. Damage from over-tightening, corrosion or a mismatched flare can cause slow seepage that is hard to spot. Inspect both ends of the hose and the mating connections before reassembly.
Because the flare must match the pump and gear, inspect the existing connections and the hose before removing it. Note the flare style and seat condition, and use a wrench sized for the flare nuts. Once the line is connected, run the engine and turn the steering lock to lock while watching each joint for fluid.
- Inspect flares for cracks, burrs or rounded edges
- Use a wrench sized for the flare nuts
- Check each joint for seepage after the first run
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18012.01 |
| UPC | 804314035242 |
| Hose type | Power steering pressure hose |
| Fitting style | Flared |
| Engine | 6 or 8 cylinder |
| Position | To gear |
Vehicle fitment
It fits 1976–1979 Jeep CJ5 and CJ7 in Base, Golden Eagle and Renegade trims.
Scrambler and Wrangler models are not covered, and other years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flared fittings must match the flared connections on your pump and steering gear. Check the fitting style on the existing hose before fitting, and confirm fitting dimensions against your pump and gear.
What’s included
One power steering pressure hose. No clamps or other components are named.









