Overview
The Omix-Ada pilot bushing, part number OAI16910.09, is a direct-fit replacement bushing for 6-cylinder engines in 1965 to 1971 Jeep vehicles. A pilot bushing supports the transmission input shaft at the rear of the crankshaft.
Omix-Ada lists fit for the CJ3, CJ5 and CJ6, Commando, Dispatcher, DJ5 and DJ6, FC150 and FC170 (including FC170HD), Gladiator, J-100 through J-3800 trucks, Jeepster, Universal and Wagoneer (SJ) models, with each model limited to specific years between 1965 and 1971.
Key features
- Direct-fit replacement
- Fits 6-cylinder engines
- Covers 1965-1971 Jeep models including trucks and Wagoneer
- Part number OAI16910.09
Signs of a worn pilot bushing
The pilot bushing holds the front of the transmission input shaft in line with the crankshaft, so wear shows up as misalignment in the clutch and gearbox. A worn bushing can cause a rough or grabbing clutch engagement, a whine in neutral, or difficulty getting the transmission into gear. Because the bushing is small, it is easy to overlook until the clutch is out for another reason.
When the bushing is replaced, the input shaft tip should be checked for scoring, and the crankshaft recess should be cleaned before the new part goes in. Use a light coat of grease on the bushing bore so the shaft turns smoothly without binding. Confirm the bushing seats fully before reinstalling the transmission.
- Inspect the input shaft tip for scoring
- Clean the crankshaft recess before fitting
- Check clutch release for smooth action
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI16910.09 |
| Part type | Pilot bushing |
| Engine | 6-cylinder |
| Fitment type | Direct fit |
Vehicle fitment
It fits the CJ3, CJ5, CJ6, Commando, Dispatcher, DJ5, DJ6, FC150, FC170 (including FC170HD), Gladiator, J-100 through J-3800 trucks, Jeepster, Universal and Wagoneer (SJ) models, each within specific years from 1965 to 1971.
Models outside this list, including Cherokee, Wrangler and CJ7, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pilot bushing replacement is normally done during a transmission or clutch service, so confirm the procedure for your vehicle before you start the work.









