Overview
The Omix-ADA 17467.04 is a set of connecting rod bearings in .030 oversized dimension for the 4 cylinder 134 engine. It comes as a pair.
The oversize bearings are made for 4 cylinder 134 engine applications from the 1941 Willys MB to the 1971 Jeepster.
Key features
- .030 oversized connecting rod bearing.
- Sold as a pair in .030 oversize.
- Built for the 4 cylinder 134 engine.
- Omix-ADA part number OAI17467.04.
Choosing oversize bearings
Oversize bearings are used when the crankshaft journals have been machined smaller to remove wear or scoring. The .030 step increases the bearing bore size so the shell clearance is correct on the reground journal. Using a standard shell on a reground crank leaves the bearing too tight and can cause heat damage.
Before buying, measure each journal with a micrometer and confirm the crank has been ground to the .030 step. Machine shops often mark the undersize on the crankshaft, which helps match the correct shell. Mixing sizes across the journals is a common mistake, so check every rod.
- Measure every journal, not just one
- Confirm the crank is ground to .030
- Match shell size to each rod
- Re-torque bolts after a short run
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI17467.04 |
| Part type | Connecting rod bearings |
| Engine application | 4 cylinder 134 engine |
| Size | .030 oversized |
| Quantity | Pair |
| Fitment | Direct fit, per manufacturer |
Vehicle fitment
The manufacturer fitment list includes Willys MB, Willys Panel, Sedan Delivery, Truck and Utility Wagon models, along with the CJ-2, CJ-3, CJ-5 and CJ-6 entries, the DJ-3, and the FJ and M38 models.
Models built after 1971 and CJ5 years from 1972 onward fall outside this fitment range. Check the year, model and trim against this fit before ordering.
What’s included
The set is connecting rod bearings only, so verify the parts against your installation before you begin.









