Overview
The Omix-ADA 16526.06 is an intermediate axle seal for the disconnect style Dana 30 front axle. It fits the passenger side at the intermediate shaft on the 1987–1995 Jeep Wrangler YJ.
On a disconnect style Dana 30, the intermediate shaft passes through the housing, and this seal fits the front passenger side position.
It is a direct OE replacement built to original specifications, with a limited five year manufacturer warranty. It suits Wrangler YJ owners restoring a front axle.
A disconnect style Dana 30 uses an intermediate shaft on one side so that the axle can be disengaged, and the shaft needs its own seal at the housing. The seal numbered 16526.06 serves that passenger side location on the 1987 to 1995 Wrangler YJ.
The Wrangler YJ trims that fit run from Base and Sport to Sahara, Rio Grande and Islander, so the seal applies across the full YJ range for those years.
The limited five year manufacturer warranty covers this seal along with the other direct OE replacement parts in the range.
Key features
- Intermediate axle seal for the Dana 30 front axle
- Dana 30 disconnect style
- Passenger side at the intermediate shaft
- Front position
- Fits the 1987 to 1995 Wrangler YJ
- Limited five year manufacturer warranty
Disconnect axle seal basics
A disconnect Dana 30 lets the front wheels run without turning the front driveshaft, and the intermediate shaft carries the drive when engaged. Its seal keeps oil in the housing where that shaft exits, so any leak on the passenger side is worth tracing early. Check for oil on the inside of the wheel, around the intermediate shaft housing and on the frame near the axle.
Work on this seal goes faster when the axle is already open. Clean the seal bore, inspect the intermediate shaft surface for grooves, and lightly coat the seal lip with gear oil before pressing it in. Leaks sometimes return from a worn shaft rather than the seal itself, so look closely at the shaft before buying parts.
- Check the disconnect hub for play
- Inspect the shaft surface for grooves
- Refill the housing to the correct level after the job
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16526.06 |
| UPC | 804314060046 |
| Part type | Intermediate axle seal |
| Axle | Dana 30, disconnect style |
| Location | Passenger side at the intermediate shaft |
| Position | Front |
| Warranty | Limited five year manufacturer warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits this vehicle:
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
It fits the 1987–1995 Wrangler YJ. The Cherokee XJ, the Wrangler TJ and the Wrangler JK are outside this fit. Check fit against your vehicle’s year, model and trim before ordering.
Installation notes
The seal fits the passenger side at the intermediate shaft of a disconnect style Dana 30. No further installation details are given.









