Overview
The Omix-Ada 17112.25 is a factory replacement idler pulley for 2.5L or 3.1L diesel engines. It fits the 1995–1997 Jeep Cherokee (XJ), the 1999–2001 Jeep Grand Cherokee (WJ) and the 1995–1998 Jeep Grand Cherokee (ZJ).
The idler pulley is stationary and works alongside the tensioner pulley to guide the accessory drive belt. Its bearings can wear out and need replacing over time.
Key features
- Factory replacement built as a direct fit
- Stationary idler that works with the tensioner pulley
- It is for 2.5L or 3.1L diesel engines.
- Bearings can wear and need replacement
- It fits 1995–1997 Jeep Cherokee (XJ), 1999–2001 Jeep Grand Cherokee (WJ) and 1995–1998 Jeep Grand Cherokee (ZJ) models. Wrangler models are not covered.
Spotting a worn idler
An idler pulley spins freely on its bearing and keeps the accessory drive belt on its correct route. When the bearing starts to fail, the first signs are usually noise and play rather than a sudden breakdown. A worn idler can let the belt wander, squeal or ride off the pulley, and a seized bearing can damage the belt itself. On a diesel engine, the belt drives accessories that keep the vehicle running day to day, so a noisy pulley deserves early attention.
Inspect the pulley with the belt removed. Spin it by hand and feel for roughness, wobble or drag. Check the belt for cracks, glazing and uneven wear at the same time, because a rough pulley can damage a new belt quickly. Replacing the tensioner pulley alongside the idler is a common step, since both carry the belt load and wear at similar rates. Route the belt exactly as the engine diagram shows before starting the engine.
- Grinding or whining from the front of the engine
- Side play or wobble when the pulley is turned by hand
- Belt squeal or a belt that tracks off-center
- Cracks or glazing on the belt’s ribbed surface
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17112.25 |
| UPC | 804314285272 |
| Part type | Idler pulley |
| Engine | 2.5L or 3.1L diesel |
| Fit type | Direct factory fit replacement |
Vehicle fitment
It fits the 1995–1997 Jeep Cherokee (XJ) in Classic, Country, SE and Sport trims, the 1999–2001 Jeep Grand Cherokee (WJ) in Laredo and Limited trims, and the 1995–1998 Jeep Grand Cherokee (ZJ) in 5.9 Limited, Laredo, Limited, Orvis, SE and TSi trims. Years outside these ranges and all Wrangler models are not covered. Confirm fit against your vehicle’s year, model and trim before ordering.
Years outside these ranges and all Wrangler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace the idler pulley and the tensioner pulley at the same time, as Omix-Ada recommends, because the idler bearings can wear out. Check the diesel engine size against your vehicle before fitting.
What’s included
The idler pulley is the item described. The tensioner pulley is not included and is recommended for replacement at the same time.












