Select your vehicle

Crown Automotive Idler Pulley – J3239821

Crown Automotive

$50.61In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 3:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Crown Automotive idler pulley, part number J3239821
  • Made for a 4.2L 258 cubic inch engine
  • 6 grooves and 3.95 inch diameter
  • Fits CJ5, CJ7, J10 and early Wrangler YJ models

Description

Overview

The Crown Automotive J3239821 is an idler pulley with 6 grooves and a 3.95 inch diameter, made for a 4.2L 258 cubic inch engine. It fits the 1981–1983 and 1981–1986 Jeep CJ5 and CJ7, the 1981–1987 Jeep J10 and the 1987–1990 Jeep Wrangler (YJ).

An idler pulley is a stationary pulley that keeps the accessory drive belt on its path around the engine. This pulley is a direct fit part for the Jeep models covered below.

Key features

  • 6 grooves
  • 3.95 inch diameter
  • Stationary idler design for belt routing
  • Made for a 4.2L 258 cubic inch engine
  • Fits CJ5, CJ7, J10 and early Wrangler YJ models

Belt routing on older Jeeps

Older Jeep engines often run several accessories from one belt, with idlers placed to hold the belt against the crank, water pump and alternator pulleys. Each idler sets the wrap angle on the neighboring pulleys, so a replacement needs to sit in the same position as the original. Before removing the old pulley, note the belt route with a photo or a quick sketch. Compare the bearing and the groove profile with the belt, and replace the bearing if it feels rough or wobbles.

Because the pulley is stationary, its bearing carries the belt load continuously. Look for heat discoloration, shaft play or a groove worn into one side, and replace the pulley if any of those are present. Keep the belt routing diagram from the engine service manual at hand during installation, and check the belt tension after the first few minutes of running.

Specifications

Brand Crown Automotive
Part number J3239821
UPC 848399061062
Part type Idler pulley
Grooves 6
Diameter 3.95 inch
Engine 4.2L 258 cubic inch

Vehicle fitment

It fits the 1981–1983 Jeep CJ5 (Base, Laredo, Limited, Renegade), 1981–1986 Jeep CJ7 (Base, Laredo, Limited, Renegade), 1981–1987 Jeep J10 (Base) and 1987–1990 Jeep Wrangler YJ (Base, Islander, Laredo, S, Sahara, Sport).

Models outside these four entries, including the Wrangler TJ generation, are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Wrangler TJ models and other models outside these four entries are not part of this fit. Check your year, model and trim before ordering.

SKU: CROJ3239821 Category:

Specification

Shipping weight 2.00 lbs
Package dimensions 4.50 × 4.50 × 1.50 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51981–1983Base, Laredo, Limited, Renegade
Jeep CJ71981–1986Base, Laredo, Limited, Renegade
Jeep J101981–1987Base
Jeep Wrangler (YJ)1987–1990Base, Islander, Laredo, S, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is Crown Automotive part number J3239821?

It is a Crown Automotive idler pulley with 6 grooves and a 3.95 inch diameter. It is made for the 4.2L 258 cubic inch engine and fits several early Jeep CJ, J10 and Wrangler YJ models.

Does this idler pulley fit a 1981 Jeep CJ7?

Yes. It fits the 1981–1986 Jeep CJ7 in the Base, Laredo, Limited and Renegade trims. Confirm your year, model and trim before ordering.

Does this pulley fit a Wrangler TJ?

No. TJ models are outside this fit, which covers the 1987–1990 Wrangler YJ among the Wrangler entries. Verify your model against your vehicle before ordering.

Is the pulley grooved?

Yes. It has 6 grooves and a 3.95 inch diameter. Confirm the groove profile matches your existing belt before installing the pulley.

How do I know the belt is the right length?

Belt length depends on the pulley layout and the accessories driven. Measure the old belt or match it to the belt routing for your engine before buying a new one, and check that the idler groove matches the belt's ribs.

Should the tensioner be checked when the idler is replaced?

Yes. A worn tensioner can cause the belt to slip or ride off the pulley even when the idler is good. Check its spring action and pivot, and replace it if it moves unevenly or shows wear.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon