Overview
The Crown Automotive idler pulley, part 4854092, is a smooth 3.00-inch diameter pulley that comes with its shaft. It is for 4.0L six-cylinder engines and is not tied to a particular model year, model or chassis code.
Key features
- Smooth pulley surface
- 3.00-inch diameter
- Includes shaft
- Fits 4.0L six-cylinder engines
Belt tension and pulley wear
An idler pulley guides the belt and keeps tension on the drive. Because the pulley turns on a bearing, wobble, roughness or noise when it spins usually means the bearing is failing. Check the pulley with the engine off by spinning it by hand and feeling for play or grinding.
When replacing an idler, inspect the belt for cracks, glazing and fraying, and check the tensioner and other pulleys in the same drive. Replacing the belt at the same time is common practice because a worn belt can damage a new pulley. Confirm alignment, since a misaligned pulley wears the belt quickly. Note any squeal or chirp during the first start, and recheck the belt after a short drive.
- Check for bearing play with the engine off
- Inspect the belt for cracks and fraying
- Replace worn pulleys and belt together
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4854092 |
| UPC | 848399009187 |
| Type | Idler pulley |
| Diameter | 3.00-inch |
| Surface | Smooth |
| Included | Shaft |
| Engine listed | 4.0L 6 cylinder |
Vehicle fitment
Confirm fit for your engine and belt drive, and for your vehicle’s year, model and trim, before ordering.
What’s included
The pulley comes with its shaft. A belt, bolts and mounting bracket are not included.









