Overview
The Omix-ADA 17729.01 is a fuel sender unit float that serves as a direct OE replacement for Jeep CJ fuel sending units. It is built to original specifications.
It comes with a limited five year warranty.
Fuel sender care
The float rides on top of the fuel and moves a sending arm that changes the resistance read by the gauge. A float that has taken on fuel or that binds on its arm can give a gauge reading that stays high, low or erratic. When a sender is replaced, the float arm should move freely through its full travel, and the wiring connector should be clean and secure before the tank is closed.
Fuel gauge problems often trace back to the sending unit, but a poor ground or corroded connector can imitate a bad float. Replacing the sender while the tank is accessible is a practical time to inspect the fuel pump wiring, tank seal and tank condition. Check gauge operation after refilling the tank and driving a short distance, and keep fuel and ignition sources away during the work.
- Move the float arm through full travel before installing
- Inspect the connector for corrosion
- Check the gauge reading after refueling
- Keep sparks and open flames away during work
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17729.01 |
| UPC | 804314141080 |
| Replacement type | Direct OE replacement |
| Compatibility | All CJ sending units, per brand |
| Warranty | Limited five year warranty |
Vehicle fitment
It fits all CJ sending units, but no model years or chassis codes are identified. Confirm the match against your original sending unit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm whether a gasket is needed for your installation before starting.









