Select your vehicle

Omix-ADA Dana 44 Pinion Oil Seal – 16521.21

Omix-Ada

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear pinion oil seal for Dana 44 axles on 1999 to 2000 Jeep Grand Cherokee WJ models built before 3/29/00.
  • Fits the Laredo and Limited trims
  • Part number 16521.21, UPC 804314175955.

Description

Overview

The Omix-ADA 16521.21 is a rear pinion oil seal for the Dana 44 axle. It fits 1999 to 2000 Jeep Grand Cherokee WJ models built before 3/29/00, in the Laredo and Limited trims.

The pinion seal keeps gear oil in the rear differential where the pinion shaft enters the housing. It is a direct OE replacement built to original specifications.

Rear axle service tips

A rear pinion seal is changed most often when a rear differential is opened for gears, bearings or a pinion crush sleeve job. Because the seal sits at the pinion, the old seal can be pried out once the yoke is removed. Work carefully so the yoke sealing surface is not scratched.

Clean the housing bore before seating the new seal and use a seal driver rather than a hammer. A square, fully seated seal keeps gear oil in the housing and reduces early leaks. After the first drive, look at the seal area again for any weep.

  • Clean the housing bore before pressing the seal in
  • Use a seal driver so the lip stays square
  • Recheck for leaks after the first few miles of driving

Specifications

Brand Omix-ADA
Part number 16521.21
UPC 804314175955
Axle Dana 44
Position Rear
Build date Models built before 3/29/00

Vehicle fitment

It fits the 1999 to 2000 Jeep Grand Cherokee WJ in the Laredo and Limited trims.

It covers only models built before 3/29/00, so later 1999 and 2000 builds are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The package is one pinion oil seal. Check the package contents against your installation before starting.

SKU: OAI16521.21 Categories: ,

Specification

Shipping weight 1.00 lbs
Package dimensions 15.00 × 9.00 × 7.00 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (WJ)1999–2000Laredo, Limited

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Grand Cherokee is the Omix-ADA 16521.21 for?

It fits the 1999 to 2000 Jeep Grand Cherokee WJ in the Laredo and Limited trims. Confirm your vehicle's year, model and trim before ordering.

Does this seal fit a 2000 Grand Cherokee built after March 2000?

No. The fit is limited to models built before 3/29/00, so a later build is not covered. Check your build date before ordering.

Is this seal for a front or rear axle?

It is a rear pinion seal for Dana 44 axles. Check the position on your axle before ordering, since this seal is for the rear only.

Does a rear pinion seal need a new yoke when it is replaced?

Not always. Replace the yoke only if the sealing surface is grooved or pitted. A smooth yoke gives the new seal a clean surface to ride on and can be reused.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon