Overview
The Omix-ADA 16749.06 is a rubber front brake caliper bushing for the 1990–2001 Jeep Cherokee, 1993–1998 Grand Cherokee and Wranglers built 1990–1995, 1997–2006 and 2004–2006.
A rubber bushing in the caliper mount keeps the caliper centered and lets it move on its slide pin as the pads wear. When the rubber hardens or tears, the caliper can bind. The part is a direct OE replacement built to original specifications and carries a limited five year warranty. Rubber ages with heat and brake dust, so a bushing that looks cracked or flattened is a good candidate for replacement. It fits a long span of Cherokee, Grand Cherokee and Wrangler front brakes.
Key features
- Rubber front brake caliper bushing
- Direct OE replacement built to original specifications
- Direct fit listing
- Covers Cherokee, Grand Cherokee and Wrangler
- Limited five year warranty
Signs the bushing needs replacing
A caliper that sticks, drags or wears one pad faster than the other often points to a bushing that has lost its flexibility. Rubber bushings are exposed to heat, moisture and brake dust, so they can crack, swell or flatten over time. Those changes limit how far the caliper can slide, which can cause heat buildup and uneven braking.
Inspect the bushing whenever the pads are replaced. Check for tears, hardening, bulges and any sign of rubber pulling away from the bore. Clean the slide pin and bushing bore, and confirm the caliper moves freely after assembly. Replacing bushings and pins at the same time helps keep the caliper sliding smoothly.
- Look for cracks, flattening or hard spots
- Check that the slide pin moves freely
- Keep petroleum products away from rubber parts
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16749.06 |
| UPC | 804314029432 |
| Part type | Brake caliper bushing |
| Position | Front |
| Material | Rubber |
| Fit type | Direct fit |
| Warranty (stated by Omix-ADA) | Limited five year warranty, covering the bushing |
Vehicle fitment
It fits the 1990–2001 Jeep Cherokee, the 1993–1998 Jeep Grand Cherokee, and Jeep Wranglers from 1990–1995, 1997–2006 and 2004–2006, covering the YJ, TJ and LJ. The Wrangler ranges overlap, so TJ and LJ owners will find their years in both the 1997–2006 and 2004–2006 entries.
It does not fit the 1999 and newer Grand Cherokee or the 2007 and newer Wrangler. Years before 1990 are not covered either. It is for the front brakes only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Rubber bushings should be checked together with the caliper slide pins, because a corroded pin can tear a new bushing. Use the Jeep service procedure for caliper removal and reassembly. Wipe the bushing bore clean and avoid petroleum products on rubber parts; use only a lubricant that is safe for rubber brake components.
What’s included
- Rubber caliper bushing, part 16749.06. Confirm the quantity needed for your caliper before ordering.
Not included: the caliper, slide pins, brake pads or rotor.












