Overview
The Mickey Thompson Classic III 15×10 wheel in Black (part number M/T90000001791) is a 15 inch aluminum wheel, 10 inches wide, built on a 5 on 5.5 bolt pattern with a 106 center bore. It carries a -45 offset and 3.7 backspacing, and it suits owners who want a satin black truck wheel with hand holes.
The satin black finish has a clear coat for protection, and the polished hand holes give the face a distinctive look. The wheel is rated for high loads and carries a limited lifetime warranty backed by the M/T stamp of quality. It is labeled Universal Fit, so confirm the bolt pattern, center bore and offset against your hub before mounting.
Key features
- Polished hand holes for a distinctive look
- Satin black finish with a protective clear coat
- 15 inch diameter and 10 inch width
- High load rating stated by Mickey Thompson
- Limited lifetime warranty
Hub match and upkeep
A 5 on 5.5 bolt pattern, 106 center bore and -45 offset are the three points that decide whether a wheel mounts cleanly. Measure the hub first. Once those match, check that the tire clears the brake caliper and fender with the suspension at its normal height.
Satin black finishes with clear coat need only mild cleaning. Avoid harsh solvents on the face and rinse grit off the hand holes so the edges stay sharp. Check the clear coat after rock contact, since a chipped coat is easier to repair early.
Torque lug nuts in a star pattern and recheck them after early drives. Lug seat wear can loosen the fit over time, so inspect the seats when rotating tires and replace damaged hardware before it causes trouble.
- Measure hub bolt pattern and center bore
- Test fit the offset with the tire mounted
- Check the clear coat after rock contact
- Inspect lug seats at each rotation
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001791 |
| Style | Classic III |
| Finish | Satin black with protective clear coat |
| Construction | Aluminum |
| Wheel diameter | 15 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 106 |
| Offset | -45 |
| Backspacing | 3.7 |
Vehicle fitment
No vehicle is named for this 15×10 wheel, and Mickey Thompson labels it Universal Fit. Fit is decided by the 5 on 5.5 bolt pattern, the 106 center bore and the -45 offset relative to your hub. Use a hub measurement rather than a vehicle name when you decide.
Older Toyota Land Cruiser, Jeep CJ, Ford and Dodge/Ram applications are excluded from center cap availability, specifically 1986 and earlier Jeep CJ Models, 1997 and earlier Toyota Land Cruiser Models, and the 1997 and earlier Ford and 2002 and earlier Dodge/Ram 3/4 and 1-Ton Pickups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the -45 offset and 3.7 backspacing against brake and suspension parts with a test fit. Use lug hardware that matches the wheel’s seat design, and recheck torque after early drives on the trail.
What’s included
The 15×10 Classic III wheel in Black. Center caps are not included.
Not included: Tires.









