Overview
The Mickey Thompson Classic III 16×8 wheel in black is an aluminum truck wheel with an 8 on 6.5 bolt pattern, part number M/T90000001793. It measures 16 inches in diameter and 8 inches wide, with a -12 offset, 4 backspacing and a 125 center bore.
The satin black finish carries a protective clear coat. The Classic III is a popular truck wheel with a high load rating and a limited lifetime warranty. Its Universal Fit marking means bolt pattern, center bore and offset guide fit rather than a vehicle year.
Key features
- Satin black finish sealed with a protective clear coat
- Aluminum construction in a 16 by 8 inch size
- Description also names polished hand holes in the face
- 8 on 6.5 bolt pattern and 125 center bore
- High load rating and limited lifetime warranty.
Caring for satin black wheels
Satin black finishes with clear coat hide light scratches better than gloss, but they still need gentle care. Wash with mild soap and a soft mitt, and avoid abrasive pads or strong solvents that can dull the sheen. Brake dust bakes onto hot wheels, so rinse them regularly and use a cleaner made for coated aluminum.
Negative offset pushes the mounting face outward, which changes how the inner barrel clears calipers and suspension parts. When you swap wheels, compare backspacing with the original set so the new one does not rub at full lock or under load. Tire sidewall flex and load also affect clearance, so recheck after the first few drives.
- Clean brake dust off the wheels regularly
- Inspect the clear coat for chips and lifting
- Recheck lug torque after the first drives
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001793 |
| Style | Classic III |
| Finish | Black |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -12 |
| Backspacing | 4 |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle list is attached, and the wheel is marked Universal Fit. Start with the 8 on 6.5 bolt pattern and 125 center bore, then check the -12 offset and 4 backspacing against brake and fender clearance on your truck.
Center caps do not fit several older trucks: Ford 3/4 and 1-Ton pickups from 1997 and earlier, Dodge/Ram 3/4 and 1-Ton pickups from 2002 and earlier, Toyota Land Cruisers from 1997 and earlier, and Jeep CJs from 1986 and earlier. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the wheel uses a -12 offset and 4 backspacing, measure the gap between the inner barrel and your brake caliper and suspension components with the wheel mounted.
What’s included
Caps, valve stems and fasteners may need to be sourced separately. Check the package contents against your installation before starting.
Not included: Have caps and fasteners ready before mounting if your installation needs them.









