Overview
The Method Race Wheels MR310 Con 6 MR31078560935 is a 17×8.5 aluminum spoke-style wheel with a 6 on 5.5 bolt pattern in a bronze and matte black finish. The wheel has an offset of 35, backspacing of 6.1 and a center bore of 106.
Method Race Wheels was founded to serve the off-road racing community with wheels built for that sport. Each wheel is engineered for its intended use, with finite element analysis and field testing, and the design aims to reduce weight while adding strength.
Key features
- 17 inch wheel diameter, 8.5 inch width
- 6 on 5.5 bolt pattern
- Offset 35 and backspacing 6.1
- Center bore 106
- Aluminum construction
- Spoke style
- Bronze and matte black finish
- MR310 Con6 series
Offset and backspacing basics
Offset and backspacing decide where the wheel sits relative to the hub and the fender. A wheel with more backspacing sits deeper behind the suspension, while a change in offset shifts the face in or out. Both affect tire rubbing, steering geometry and how much room the brakes have, so these figures should be compared with your current setup before any purchase.
Hub-centric fit is another point to consider. A wheel with a center bore that matches the hub carries the load on the hub itself rather than the lug studs, which reduces vibration. When the center bore is larger than the hub, hub rings are commonly used, and they are worth checking before mounting. Lug seat style should also match the wheel so the nuts or bolts seat evenly.
- Compare offset with your current wheels
- Check whether hub rings are needed
- Confirm lug seat style before mounting
- Re-check nuts after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MR31078560935 |
| Catalog part number | MRWMR31078560935 |
| Product type | Wheel |
| Series | MR310 Con6 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 35 |
| Backspacing | 6.1 |
| Center bore | 106 |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Bronze with matte black |
Vehicle fitment
Compare the 6 on 5.5 bolt pattern, offset 35, backspacing 6.1 and 106 center bore with your vehicle’s requirements before ordering.
Confirm the bolt pattern, offset, backspacing and center bore against your vehicle’s requirements before ordering.
This wheel can be matched to vehicles with a 6 on 5.5 bolt pattern and the offset, backspacing and center bore above. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check the bolt pattern, center bore, offset and backspacing against your vehicle and brake clearance before mounting. Match the lug nut seat style to the wheel and tighten them in a star pattern to the vehicle’s specification.
Re-torque the lug nuts after the first miles of driving. Check tire, fender and suspension clearance at full steering lock and full suspension travel before heading off-road.
What’s included
The wheel is sold on its own, without lug nuts, center caps, valve stems, tires or other hardware.
Not included: Tires, lug nuts and mounting hardware are sold separately.









