Overview
The matte black Method Race Wheels 706 Bead Grip in 17×8.5 with a 6 on 5.5 bolt pattern is part number MRWMR70678560500. Method forms its six-point face from solid A356 aluminum and adds debossed Method logos.
Method pairs a race-inspired reinforced inner lip with its patented Bead Grip technology. That technology lets tires run at pressures that previously called for beadlock wheels, and the wheel is DOT approved.
Key features
- Six-point design, solid A356 aluminum
- Debossed Method logos
- Race-inspired reinforced inner lip
- Patented Bead Grip technology for lower-pressure running
- Matte black finish
- DOT approved
Lower-pressure running basics
Running lower tire pressure changes how the tire sits on the bead and how it flexes over rough ground. A wheel designed for low pressure helps keep the tire seated, but the tire still needs care. Start with a small step down from your normal pressure, drive slowly and watch how the tire responds on turns and rocks before going further.
Tire choice matters as much as the wheel. Select a tire with a sidewall and load rating suited to the wheel size, and avoid running it below the pressure the tire can carry. After any trail run, check for sidewall damage, bead movement or air loss. Keep the valve stem clean and carry a gauge and a portable air source to restore pressure before pavement.
- Step down pressure gradually and test
- Match tire load rating to the wheel
- Check for bead movement after trail runs
- Carry a gauge and portable air source
Specifications
| Brand | Method Race Wheels |
|---|---|
| Model | 706 Bead Grip |
| Part number | MRWMR70678560500 |
| Size | 17×8.5 |
| Bolt pattern | 6 on 5.5 |
| Finish | Matte Black |
| Material | A356 aluminum |
| Approval | DOT approved |
Vehicle fitment
A 6 on 5.5 pattern suits particular vehicles, so match it to your hub before ordering.
Compare the 6 on 5.5 bolt pattern and 17×8.5 size with your vehicle’s specifications. Confirm your vehicle’s year, model and trim before ordering.










