Overview
The Method Race Wheels 704 Trail Series is a 17×8.5 aluminum wheel with a 6 on 5.5 bolt pattern and a matte titanium finish, part number MRWMR70478560800. It is designed for off-road use and uses Method’s Bead Grip design, which is meant to hold the tire bead more firmly when running lower air pressures.
The 704 is a one-piece cast wheel made from 356 aluminum with T6 heat treatment. Method Race Wheels positions the brand around the off-road racing community and says each wheel was engineered with Finite Element Analysis and field testing. The stated goal of the design is to minimize weight while increasing strength. Because a wheel is sized by its diameter, width, offset, center bore and bolt pattern rather than by a vehicle model alone, check those dimensions against your vehicle before fitting it.
Key features
- Bead Grip design, which Method describes as a patent pending technology that engages the tire bead seat for added grip at lower air pressures.
- Reinforced inner lip taken from race wheel design.
- Aggressive safety hump on the inner and outer bead seat, which the company says stabilizes the tire and helps prevent de-beading.
- One-piece cast 356 aluminum construction with T6 heat treatment.
- Windowed style with a matte titanium finish.
- Engineered and tested with Finite Element Analysis and field tests.
Hub-centric rings and clearance
Hub-centric rings bridge the gap between a wheel’s center bore and a larger hub. They are usually sized to the hub and must seat flush against the wheel before the lug nuts go on. Rings sized wrong can cause vibration that looks like a balance problem, so confirm the fit before a trail trip.
Offset and backspacing decide how far the wheel sits in the fender and how close it comes to brake calipers and suspension links. A small change in offset can shift stance and clearance more than many buyers expect. Checking clearance at full steering lock and under suspension compression helps catch rubbing before it wears a tire.
- Seat hub-centric rings flush before torquing
- Check clearance at full steering lock
- Recheck clearance after changing tire size
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478560800 |
| Series | MR704 Bead Grip (704 Trail Series) |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 0 |
| Backspacing | 4.75 |
| Center bore | 106 |
| Style | Windowed |
| Finish | Matte Titanium |
| Construction | One-piece cast 356 aluminum with T6 heat treatment |
Vehicle fitment
This wheel is universal fit and is not built for a particular vehicle. A 6 on 5.5 pattern with 0 offset and a 106 center bore only suits hubs that match those dimensions, so compare them with your vehicle before choosing this wheel.
Wheels in a different diameter, width, offset, center bore or bolt pattern are separate parts and will not match these specifications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 106 center bore to your hub. If your hub is a different size, hub-centric rings are the usual accessory for fitting a wheel that does not center on the hub. Check clearance to suspension and brake components using the offset and backspacing, since both change where the wheel sits. Because this wheel is built for lower air pressures, confirm the tire seats fully and holds pressure before running it off-road.
What’s included
Check the package contents against your installation before starting.
Not included: Confirm whether tires, lug hardware, center caps and valve stems are needed before installing.














