Overview
The Method Race Wheels 315 17×8.5 in Machined finish, part number MRWMR31578516300, is an aluminum wheel with a 6 on 135 bolt pattern and an 87 center bore. It has a windowed design from the MR315 series and is a universal fit wheel, not built for one make, model or year.
Method made the 315 wheel for off-road use and reports that finite element analysis and field tests guided its design. Because no individual vehicles are named, mounting depends on matching the bolt pattern, bore and backspacing to your own vehicle.
Key features
- 17-inch diameter and 8.5-inch width
- Machined finish on a windowed face
- Aluminum construction
- 6 on 135 bolt pattern with an 87 center bore
- Zero offset and 4.75 backspacing
Wheel fit and hub matching
Wheel fit comes down to several numbers working together. The bolt pattern sets how the wheel attaches to the hub, the center bore sets how it centers, and offset and backspacing set where the wheel sits relative to the fender, brakes and suspension. A wheel that matches on bolt pattern can still rub or sit off-center if the other figures do not suit the vehicle.
Before mounting, measure the hub and compare it with the wheel’s dimensions. Check that the lug nut seat matches the wheel, because a mismatch can loosen under load. After the first drives, re-check torque and look for rub marks on the tire sidewall and inner fender.
- Compare hub pilot diameter with the center bore
- Test-fit with the tire you plan to run
- Re-check lug torque after the first few drives
- Look for rubbing on the inner fender at full steering lock
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31578516300 |
| Series | MR315 |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Machined |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
This is a universal fit wheel, so it is not tied to a make, model or year. Confirm that the 6 on 135 pattern and 87 center bore suit your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Machined finishes can show scratches during mounting, so protect the face while fitting the wheel. The 87 center bore must match your hub. Confirm the lug nut seat type and torque requirements for your vehicle before mounting.
What’s included
This is one wheel only. Plan for tires, lug nuts and center caps to be sourced separately before mounting.











