Overview
The Method Race Wheels 704 Trail Series 17×8.5 in Matte Black, part number MRWMR70478550500, is a 17-inch off-road wheel with a 5 on 5 bolt pattern, a 72 center bore and zero offset. It is universal fit and is not built for a named year, make or model, so the hub match must be checked by measurement before mounting.
The 704 is made from one-piece cast 356 aluminum with T6 heat treatment, in a windowed style. Its patent-pending Bead Grip design is intended to engage the tire bead seat for more grip when running lower air pressures. The wheel was developed for off-road racing use with Finite Element Analysis and field testing, with the aim of a wheel that is lighter and stronger.
Key features
- One-piece cast 356 aluminum body with T6 heat treatment
- Bead Grip design, patent pending, meant to add grip at the tire bead seat when running lower air pressures
- Reinforced inner lip borrowed from race wheel design
- Raised safety hump on the inner and outer bead seats to help stabilize the tire and prevent de-beading
- Windowed style in a Matte Black finish
- The wheel is engineered to minimize weight while increasing strength.
- Developed with Finite Element Analysis and numerous field tests
Choosing the right setup
A wheel with a lower-pressure bead grip design works best when the tire, wheel and air pressure are chosen together. Off-road tires rated for the pressures you plan to run will seat and hold better on the bead seat. Before changing pressure, confirm the tire is rated for the lowest setting you use so the bead stays protected.
Wheel width, backspacing and offset also affect how a tire sits and how much clearance remains at the brakes and suspension. Tires that are wider than the wheel’s rated range can change the bead seat fit, so keep the size pairing within the tire’s rated limits. After fitting a new set, tighten the lug nuts evenly and re-check them after the first few trail runs.
- Match tire width to the wheel’s rated range
- Re-check lug nut torque after the first drive
- Inspect bead seats for dents after rock contact
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478550500 |
| Series | MR704 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | One-piece cast 356 aluminum, T6 heat treated |
| Fitment label | Universal Fit |
Vehicle fitment
Because it is universal fit, it is not written for one vehicle. Fit depends on the 5 on 5 bolt pattern, 72 center bore, 0 offset and 4.75 backspacing matching your own hub and clearance. Center bore is the central opening that locates the wheel on the hub, and offset describes where the mounting face sits relative to the wheel centerline.
No generations or models are named for this wheel, so compare your vehicle’s bolt pattern and center bore with the specifications above first. Confirm your vehicle’s year, model and trim before ordering.














