Overview
The Method Race Wheels 702 Series 17×8.5 in Matte Black is an aluminum spoke wheel measuring 17 by 8.5 inches with a 5 on 150 bolt pattern, part number MRWMR70278558500. It is made within the MR702 Bead Grip series by a brand that began by building wheels for off-road racing.
Each wheel is engineered for its intended use and checked with finite element analysis and field tests. The goal is to minimize weight while increasing strength, and the wheel is built for off-road use.
Key features
- Matte Black finish on a spoke design
- Aluminum construction in a 17 by 8.5 inch size
- MR702 Bead Grip series wheel
- 5 on 150 bolt pattern with 0 offset and 4.75 backspacing
- Center bore listed at 111
- Developed with finite element analysis and field testing, the design aims to reduce weight and add strength.
- Street versions of this line are offered in Diamond Cut / Clear or Matte Black, per the brand
Checking clearance at full travel
Full suspension travel is the real test for any off-road wheel. At full compression the tire moves toward the fender and the inner face gets closer to control arms and brake parts. Measure clearance with the vehicle on stands, then with it loaded, and compare the two readings before a trip.
The tire you choose changes the result. Width, sidewall height and overall diameter all shift where the tire sits. Keep a note of the tire size used for each clearance check, and test again whenever you change tires, wheels or lift height.
After installation, inspect the wheel face and spokes for rubbing marks on each outing. Watch for fresh scuffs on the fender lip or caliper area, and tighten lug nuts after the first short drive. Clean dirt from the inner wheel area so you can spot rubbing or cracking early.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70278558500 |
| Series | MR702 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 150 |
| Offset | 0 |
| Center bore | 111 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel, and it carries a Universal Fit label. Wheel clearance depends on bolt pattern, offset, backspacing and center bore, so compare each figure with your vehicle’s hub and clearance before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the wheel against brake calipers, suspension components and fenders at the tire width you intend to run before final installation.
What’s included
The package covers the wheel only, without accessories.
Not included: tires and any lug hardware, since neither is listed.














