Overview
The Method Race Wheels 701HD Trail Series 18×9 in matte black, part number MRWMR70189080518H, is a windowed trail wheel with an 8 on 6.5 bolt pattern. It is listed in the MR701 HD series and is built from one-piece cast 356 aluminum.
Method’s design notes for this wheel are the Bead Grip technology, a reinforced inner lip and a safety hump on the bead seat, all intended for trail use with reduced air pressure. The wheel is 18 inches in diameter and 9 inches wide, with a center bore of 131, an offset of 18 and a backspacing of 5.75.
Shoppers comparing trail wheels by bolt pattern will find the 8 on 6.5 layout and the center bore stated plainly in the specifications below.
Key features
- Bead Grip design that engages the tire bead seat for grip at lower tire pressures
- Reinforced inner lip based on race wheel design
- Safety hump on the inner and outer bead seat that helps the tire stay in place
- Cast one-piece from 356 aluminum and T6 heat treated
- Matte black finish with windowed styling
- Finite element analysis and field testing were used in the design, with the aim of reducing weight while adding strength.
Tire width and load rating
Tire width should suit the rim width so the bead sits square and the sidewall stays stable. A tire that is too narrow for the rim can stretch and weaken, while one that is too wide may rub at full steering lock. Check the tire’s rated width range before buying, and avoid mixing tire sizes on the same axle.
Load rating matters on trails because sidewalls flex more at low pressure. Choose a tire rated for the weight it will carry, including gear and fuel, and keep pressure within the sidewall marking. Inspect the bead and sidewall after each run for cuts or bulges.
- Match tire width to the rim width
- Keep pressure within the sidewall rating
- Inspect sidewalls for cuts after each run
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70189080518H |
| Series | MR701 HD |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 18 |
| Backspacing | 5.75 |
| Construction | Aluminum, one-piece cast 356 with T6 heat treatment |
| Style | Windowed |
| Finish | Matte Black |
Vehicle fitment
No vehicle is named for this wheel, and it is shown with universal fitment. Because the 8 on 6.5 pattern is specific, the hub must match before the wheel is considered for any vehicle, and the 131 center bore and 18 offset should be checked as well.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 8 on 6.5 bolt pattern and 131 center bore against your hub first, since mismatched dimensions can prevent safe mounting. Offset 18 and backspacing 5.75 set the wheel’s position under the fender, so verify tire width and clearance to brake and suspension parts. Confirm the lug seat type with your lug hardware before installing.
What’s included
Only the wheel is covered here. Lug nuts, center caps and tires are not part of this wheel.
Not included: Tires and wheel hardware need to be arranged before mounting.









