Overview
The Method Race Wheels 704 Trail Series 17×8.5 in matte black is part number MRWMR70478558500, with a 5 on 150 bolt pattern and a 111 center bore. Method makes it from one-piece cast 356 aluminum with T6 heat treatment, in a windowed style.
The 704 belongs to the same Trail Series as Method’s 701, with its own MR704 Bead Grip series name. Bead Grip is a patent pending feature that engages the tire bead seat, adding grip when the tire runs at lower pressures. The wheel also carries a reinforced inner lip and a safety hump on each bead seat. Method lists universal fit for this wheel, so the 5 on 150 pattern and 111 center bore are the first figures to compare with your hub.
Method builds its wheels for the off-road racing community, and the 704 is made for trail driving.
Key features
- Bead Grip seat engagement for more grip at low air pressures
- Reinforced inner lip from race wheel design
- Safety hump on inner and outer bead seats
- T6 heat-treated, one-piece cast 356 aluminum
- Windowed style with a matte black finish
- Development included finite element analysis and field tests.
- Design aim: less weight and more strength
Using the 704 on trails
A Trail Series wheel is built for use where the tire is aired down and the wheel takes hits from rocks and ruts. Tire choice, tire pressure and bead seating all feed into how well the wheel holds up. Before any trail trip, look at the bead on both sides, make sure the valve stem is firm, and check the lug nuts after the first few miles.
Matte black hides small marks, but the finish still needs inspection for chips and gouges, especially on the lip. Keep the windows free of packed mud so inspection is easy. When a wheel is changed to a different width or offset, the suspension and steering should be checked for rub and added load, and tires should be rotated on schedule to keep wear even.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478558500 |
| Series | MR704 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 111 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Fitment | Universal fit |
Vehicle fitment
The wheel is a Universal Fit design, meaning it is not built for one vehicle model. Compare the 5 on 150 bolt pattern and 111 center bore with your hub, then check offset and backspacing against your suspension and tire size.
No vehicle is named for this wheel, so there are no specific models to rule out. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 17 by 8.5 inch wheel in matte black with a 5 on 150 bolt pattern.
Not included: Center caps and lug hardware: plan for these separately before installing.














