Overview
The Method Race Wheels 701 Trail Series 18×9 in Method Bronze, part number MRWMR70189060918, is a trail wheel with a 6 on 5.5 bolt pattern. The wheel is cast from one piece of 356 aluminum, given T6 heat treatment, and carries the MR701 Bead Grip series name.
Bronze is the finish on this version. The Bead Grip design, a race-inspired inner lip and a safety hump on both bead seats are the main engineering points the maker highlights. The wheel measures 18 inches across and 9 inches wide.
Shoppers planning a trail setup that runs reduced tire pressure will find the bead design and dimensions the core of this wheel’s pitch.
Key features
- Method Bronze finish on a windowed style wheel
- Bead Grip design meant to add tire grip at lower air pressures
- Reinforced inner lip taken from race wheel design
- Safety hump on the inner and outer bead seat to help the tire stay seated
- One-piece cast 356 aluminum, T6 heat treated
- Developed with finite element analysis and field tests, per the maker
Bronze finish and care
A bronze finish on a cast wheel is durable when kept clean, but brake dust and road salt can dull it over time. Wash the wheel with a mild soap and a soft brush, and rinse thoroughly so grit does not scratch the surface. Avoid abrasive pads, since they can wear through the clear coat on painted finishes.
Inspect the bead area each time you mount a tire. Look for scuffs, corrosion or gouges where the tire seals against the rim, because those spots can leak air. Keep the windowed openings free of mud packing, which can trap moisture and hide early cracks.
- Rinse off mud and salt after every trail day
- Use non-abrasive cleaners on the face and spokes
- Inspect the bead seat before each tire mount
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70189060918 |
| Series | MR701 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 18 |
| Backspacing | 5.75 |
| Construction | Aluminum, one-piece cast 356 |
| Style | Windowed |
| Finish | Method Bronze |
Vehicle fitment
Fitment is open, with no vehicle, year or chassis attached. The 6 on 5.5 bolt pattern, 106 center bore and 18 offset decide the match, so measure your hub and check these figures first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bronze finish is a cosmetic detail, but the 6 on 5.5 pattern and 106 center bore are the dimensions that must match your hub. Offset 18 and backspacing 5.75 control inner and outer clearance, so check brake caliper and suspension clearance with the tire you plan to run. Ask a qualified installer to confirm the seat fit before the wheel is used on a trail.
What’s included
Only the wheel is covered here, without tires, center caps or lug hardware.
Not included: Tires and lug hardware are separate purchases, so plan for them before mounting.









