Overview
A 6 on 5.5 bolt pattern defines this MR306 Mesh 18×9 from Method Race Wheels, a matte black aluminum wheel with part number MRWMR30689060512N. It has a 108 center bore, an offset of -12 and backspacing of 4.5.
The face has an understated, timeless look. Polished decorative bolts around the lip can be replaced, and a black center cap comes with the wheel. The Method name is machined into one spoke.
The MR306 line runs from 16 to 20 inches and suits most trucks, Jeeps and SUVs. The -12 offset places this 18 inch size further out than a zero-offset wheel would sit.
Key features
- Matte black mesh face in aluminum
- 18 inch diameter and 9 inch width
- 6 on 5.5 bolt pattern with a 108 center bore
- Offset -12 and backspacing 4.5
- Decorative polished 13mm lip bolts, replaceable
- Black center cap included
Mounting the wheel safely
A wheel with a lot of offset depends on a clean, flat mounting surface. Before fitting, clean the hub face and the back of the wheel where it meets the hub. Light rust or paint at that contact point can change how the wheel seats, which can cause vibration or lug nuts that loosen over time.
Tighten the lug nuts in a star pattern and recheck them after the first drive. Inspect the tire and inner fender after the first few trips, looking for rub marks or uneven wear. Keep a note of the tightening sequence and the date of the check so future service is easier to plan.
- Hub face and wheel back cleaned
- Lug nuts tightened in a star pattern
- Retightening after the first drive
- Tire and inner fender inspected for rub marks
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30689060512N |
| Series | MR306 Mesh |
| Style | Mesh |
| Finish | Black (matte) |
| Construction | Aluminum |
| Wheel diameter | 18 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 4.5 |
| Lip bolts | 13mm decorative polished, replaceable |
Vehicle fitment
Fitment is handled as Universal Fit, so pick the size by measurement. Measure the hub pattern, center bore and fender clearance against your vehicle before choosing a 6 on 5.5 wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the 6 on 5.5 pattern on the hub before mounting, since the lip bolts are decorative. Confirm the lug nut seat style before fitting.
What’s included
Method’s description confirms the black center cap.
Not included: Tires are not part of this wheel product.










