Overview
The Method Race Wheels 701 Trail Series 17×9 in Method Bronze, part number MRWMR70179055912N, is an aluminum wheel for off-road builds that uses a 5 on 5.5 bolt pattern. Its listed specs include a 108 center bore, a -12 offset, a 4.6 backspacing figure and a 9 Inches width, in the windowed style of the MR701 Bead Grip series.
Method casts the 701 Trail Series as a single piece of 356 aluminum before T6 heat treatment. The patent-pending Bead Grip design is intended to engage the tire bead seat so the bead holds better when a driver lowers tire pressure for the trail. Method also reinforces the inner lip with a design taken from its race wheels and adds humps to both bead seats that stabilize the tire against de-beading.
Key features
- Patent-pending Bead Grip design for stronger bead engagement at lower air pressures
- Cast from 356 aluminum in one piece and T6 heat treated
- Inner lip reinforced using race wheel design principles
- Humps on the inner and outer bead seats that help keep the tire stabilized
- Windowed style finished in Method Bronze
- The wheel was refined with finite element analysis and field testing, which reduces weight while adding strength.
Setting pressures on the trail
Setting pressures on the trail depends on tire size, load and terrain. Lower pressure gives the tire more footprint over rocks and sand, but it also changes how the bead sits on the rim. Check the bead after every change in pressure, and avoid driving hard before the tire has seated evenly.
Wide wheels leave less room for error in clearance. A change in tire width or height can move the tire closer to the fender or suspension, so test fit with the exact tire before a trip. Keep spare valve stems and a small inflator in the vehicle for trail repairs.
After the first few drives, recheck lug torque and inspect the inner lip, humps and window edges for cracks or scuffs. Clean the bead seat when you remount a tire, and keep mud out of the wheel’s inner area to reduce corrosion on the mounting surface.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70179055912N |
| Series | MR701 Bead Grip |
| Style | Windowed |
| Finish | Method Bronze |
| Construction | One-piece cast 356 aluminum, T6 heat treated |
| Wheel diameter | 17 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 4.6 |
Vehicle fitment
Fitment is unconfirmed because the wheel carries only a Universal Fit label, with no year, make, model or chassis code. Compare the bolt pattern, center bore and offset with your hub before ordering.
The 108 center bore and 5 on 5.5 pattern are the dimensions most likely to rule a fit in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 5 on 5.5 bolt pattern and 108 center bore match your hub before the wheel goes on. Because the Bead Grip design is aimed at lower air pressures, set pressures with trail use in mind and recheck bead seating after inflation.
What’s included
Check the package contents against your order before installing, since lug nuts and center caps are not part of this item.
Not included: Tires, valve stems and lug nuts need to be sourced separately.









