Overview
The MR312 in part number MRWMR31278580500 is a 17 by 8.5 inch Method Race Wheels aluminum wheel in Matte Black. It carries an 8 on 6.5 bolt pattern and a 131 center bore. Method labels it Universal Fit, aimed at most trucks, Jeeps and SUVs in general rather than one vehicle.
Method ties the styling to its 106 Beadlock. Visible details are a concave split-six spoke, a subtle Method debossing on one spoke, and the v.3 Stree-Loc ring. The lip bolts are stainless steel and removable. Because there is no named vehicle, the 8 on 6.5 pattern and 131 center bore should be checked against the hub you plan to use.
Key features
- Matte Black finish over aluminum construction
- Concave split-six spoke with a debossed Method name
- v.3 Stree-Loc ring
- Stainless steel lip bolts that are removable
- 8 on 6.5 bolt pattern with a 131 center bore
- Bolt-on center cap with hardware
Clearance and backspacing basics
Clearance decides whether a wheel works on a given truck, Jeep or SUV. Inner clearance depends on how far the back of the wheel sits from the suspension and brake parts, while outer clearance depends on the fender and tire width. A lift kit or a larger tire changes both, so measure before mounting and recheck after any suspension work.
Brake caliper clearance is often the first limit reached with deep-offset wheels, and a rubbing caliper can wear the wheel face. Before buying, compare the wheel’s measurements with the caliper size and steering stop. Test the steering lock with the tire mounted, and look for rub marks on the inner barrel after a few drives.
- Measure caliper clearance with the tire mounted
- Test full steering lock on both sides
- Recheck clearance after any suspension change
- Note any rub marks on the inner barrel
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31278580500 |
| Series | MR312 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
This wheel is built for a broad range of trucks, Jeeps and SUVs rather than one vehicle. The 8 on 6.5 bolt pattern and 131 center bore must suit the hub on your vehicle, and offset 0 with backspacing 4.75 should be checked for clearance.
Universal Fit does not confirm clearance on any single truck, Jeep or SUV. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Backspacing is the measurement from the mounting surface to the back lip, and it affects inner clearance behind the spokes. Start by checking the 131 center bore against your hub. Install the bolt-on center cap with the hardware provided. Confirm brake caliper and suspension clearance with the tire mounted.
What’s included
The bolt-on center cap and its hardware are included. Tires and lug nuts are not part of the package.










