Overview
The Method Race Wheels 706 Bead Grip, sized 18×9 with a 5 on 120 bolt pattern in bronze, carries part number MRWMR70689052925. Its six-point face is solid A356 aluminum with debossed Method logos.
Method’s patented Bead Grip technology lets tires run at deflation pressures that once required beadlock wheels. The wheel is DOT approved.
Key features
- Six-point face in A356 aluminum
- Debossed Method logos on the face
- Race-inspired reinforced inner lip
- Patented Bead Grip for lower-pressure tire running
- Bronze finish
- DOT approved
Wheel fit and tire pressure
This larger wheel changes how the tire and suspension work together. A wider tire can rub at full steering lock or on suspension travel, so check clearance with the tires you plan to run. The bolt pattern also has to match the hub, and the offset affects how the wheel sits against the fender and brake caliper.
On the trail, tire pressure has a larger effect than wheel size alone. Lower pressures help the tire conform to rock and sand, but the bead must stay seated. Air down gradually, keep an air source and gauge in the vehicle, and check the bead and valve stem after each run. Bronze finishes can show road grit, so rinse the face after muddy trips and wash with mild soap.
- Check tire clearance at full lock and travel
- Match the hub and confirm lug seat style
- Air down gradually and watch bead seating
- Rinse grit off the face after muddy runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Model | 706 Bead Grip |
| Part number | MRWMR70689052925 |
| Size | 18×9 |
| Bolt pattern | 5 on 120 |
| Finish | Bronze |
| Material | A356 aluminum |
| Approval | DOT approved |
Vehicle fitment
Match the 5 on 120 bolt pattern and 18×9 size to your vehicle’s hub before ordering.
Confirm your vehicle’s year, model and trim before ordering.










