Overview
The Method Race Wheels 309 Grid is a 17×8.5 inch aluminum mesh wheel with a 5 on 5 bolt pattern and part number MRWMR30978550800. Its center bore is 94, offset 0 and backspacing 4.75.
The 309 Grid is an off-road wheel from the MR309 series. Method Race Wheels checks its designs with finite element analysis and field testing, aiming for a wheel that is lighter and stronger. It is universal fit, so the hub must be measured against the 5 on 5 bolt pattern and 94 center bore before mounting.
Key features
- Aluminum mesh face in a 17 by 8.5 inch size
- Bolt pattern is 5 on 5.
- Center bore of 94
- Offset of 0 and backspacing of 4.75
- The finish is gray; the title also names Titanium / Black.
- The wheel was developed with finite element analysis and field testing.
Measuring a hub before mounting
Before a wheel goes on, measure the hub instead of trusting a single figure. Check the lug pattern across opposite studs, confirm the hub bore size, and compare both with the wheel’s center bore. A small mismatch in the bore can cause vibration that feels like a balance problem, so the check is worth the few minutes it takes.
Lug seat style matters as much as the pattern. A seat that does not match the wheel can let a lug loosen, so match the nut to the wheel’s lug holes. Tighten in a star pattern and re-check torque after the first few drives, and recheck when tires are rotated.
- Measure stud spacing across opposite studs
- Confirm hub bore against the wheel bore
- Use seats that match the wheel lug holes
- Re-check torque after the first drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30978550800 |
| Series | MR309 Grid |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 94 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Mesh |
| Finish | Gray (title: Titanium / Black) |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
Fitment is not tied to a named vehicle. The specifications list Universal Fit, so the wheel has to be checked against the hub by measurement; the 5 on 5 pattern in particular should be confirmed on the vehicle before a tire is fitted.
Compare the bolt pattern, center bore and offset with the vehicle’s requirements. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub’s lug layout before mounting rather than relying on the listed figure alone. Use lug nuts whose seat style suits the wheel and tighten them in a star pattern, since uneven lug torque can warp a wheel.
What’s included
Hardware, caps and tires are not part of this wheel. Compare the contents with your install plan first.











