Overview
The Double Standard 15×10 is a black aluminum spoke wheel with a 5 on 5.5 bolt pattern, part number MRWMR30451055550N. It belongs to the MR304 Double Standard series, and it is a universal fit wheel, so no specific vehicle is tied to it.
The wheel has a -50 offset, 3.5 backspacing and a 108 center bore, which set how it sits against the hub and inner fender. It is made from aluminum. Confirm any further construction details with your installer before fitting.
Key features
- Black spoke style in a 15-inch diameter and 10-inch width.
- Aluminum construction.
- Negative -50 offset, which Method lists alongside a 3.5 backspacing.
- It is built for off-road racing use, with a design aimed at lower weight and higher strength.
- Method says each design was refined using finite element analysis and field tests.
Clearance with a deep offset
A wheel with a deep negative offset moves the tire outward, which widens the track and changes how the tire sits in the wheel well. This is common in off-road builds, but a wide tire on a deep offset can rub on fender liners, shock bodies or steering parts when the suspension compresses or the wheel turns. Measuring clearance at full lock and at full compression is a sensible step before the wheel goes on the vehicle.
Backspacing works alongside offset because it describes how far the inner barrel reaches toward suspension and brake parts. A shorter backspacing leaves room for the inner side but may limit the tire width that fits. Adding wheel spacers is a related change, and any added hardware should carry ratings that suit the load.
- Check inner fender liner clearance after mounting
- Measure the inner barrel against brake calipers
- Inspect the wheel face for scrapes after rough trails
Specifications
| Brand | Method Race Wheels |
|---|---|
| Series | MR304 Double Standard |
| Part number | MRWMR30451055550N |
| Wheel diameter | 15 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 5.5 |
| Offset | -50 |
| Center bore | 108 |
| Backspacing | 3.5 |
| Style | Spoke |
| Finish | Black |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
This is a universal fit wheel, so it is not matched to one year, make, model or trim. Compare the 5 on 5.5 bolt pattern, -50 offset, 108 center bore and 3.5 backspacing with your vehicle’s hub and wheel well before choosing it.
A universal fit wheel does not confirm clearance for brakes, suspension or the tire you plan to run. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a -50 offset and 3.5 backspacing, have a tire and wheel shop confirm inner clearance and tire rub before the wheel is mounted, especially with a wider tire.
What’s included
Only the wheel is included. Tires, center caps and lug hardware are not part of this item.









