Overview
This Method Race Wheels MR306 Mesh 18×9 is built for a 5 on 5 bolt pattern and finished in matte black aluminum, part number MRWMR30689050512N. It has a 94 center bore, an offset of -12 and backspacing of 4.5.
The MR306 mesh face keeps a restrained style. Polished 13mm bolts edge the lip and can be replaced individually. A black center cap is part of the package.
A negative offset places the wheel further outward than a zero-offset design, which affects clearance at the fender and suspension. The MR306 line covers trucks, Jeeps and SUVs in sizes from 16 to 20 inches.
Key features
- Mesh face in matte black finish
- 18 inch diameter and 9 inch width
- 5 on 5 bolt pattern
- 94 center bore
- Offset -12 and backspacing 4.5
- Polished 13mm decorative lip bolts, replaceable
Clearance and tire width
Clearance with a negative offset depends on more than the wheel alone. Tire width, sidewall height and the vehicle’s suspension travel all change how close the tire comes to the fender lip and the steering components. A wider tire on a deeply offset wheel can rub during full steering lock or when the suspension compresses over a bump.
Test the setup in stages. Turn the steering to both locks and watch the inner and outer edges of the tire. Recheck after any suspension or tire change, since a small lift or a taller sidewall can move the tire into the fender. Spacers are sometimes used to adjust offset, but they change load on the hub and should be sized with care.
- Tire width checked against fender clearance
- Full steering lock tested on both sides
- Suspension compression tested over a bump
- Clearance rechecked after any suspension change
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30689050512N |
| Series | MR306 Mesh |
| Style | Mesh |
| Finish | Black (matte) |
| Construction | Aluminum |
| Wheel diameter | 18 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 5 on 5 |
| Center bore | 94 |
| Offset | -12 |
| Backspacing | 4.5 |
| Lip bolts | 13mm decorative polished, replaceable |
Vehicle fitment
The fitment field simply says Universal Fit. Measure fender clearance and the 5 on 5 bolt pattern against your vehicle before selecting this offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The -12 offset and 4.5 backspacing change how the wheel sits relative to the brakes and suspension, so test clearance at full steering lock. Confirm the lug nut seat style before mounting.
What’s included
The black center cap is included with the wheel.
Not included: Tires are not part of this wheel.










