Select your vehicle
-13%

Method Race Wheels 14″ Beadlock Spacer Kit – SPC1418-H

Method Race Wheels

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Method Race Wheels 14-inch beadlock spacer kit, part number MRWSPC1418-H
  • Bead allowance increase of 1/8 inch (0.125 inch) for 14-inch wheels
  • For thick tire beads that cause assembly trouble, such as sheared bolt heads
  • Match fitment by rim size, not by vehicle

Description

Overview

The Method Race Wheels SPC1418-H is a 14-inch beadlock spacer kit, part number MRWSPC1418-H. It increases the bead allowance of a 14-inch beadlock wheel by 1/8 inch (0.125 inch) and is made for 14-inch UTV beadlock wheels.

Spacers address beads that are too thick to seat, a common problem on light truck tires. When a thick bead will not seat, bolt heads can shear off at low torque values.

Key features

  • Bead allowance increase of 1/8 inch (0.125 inch) on 14-inch wheels
  • Solves assembly problems caused by very thick tire beads
  • Truck wheels on the V.1 beadlock ring usually need spacers for tires 37 inches and up.

Tire bead and seating

Bead allowance is the space a wheel gives the tire bead so it can seat against the bead seat and the clamping ring. A thick bead reduces that space, and the tire may fail to seat evenly even when the bolts are tight. Inspect the bead for lumps or uneven thickness before mounting, and make sure the bead seat is clean and free of rust, since debris can stop the bead from sitting flat.

Spacers are best used as a targeted fix, not a general upgrade. Mount slowly, watch the bead line on both sides, and avoid over-torquing the ring bolts to force the tire to seat. After the first short run, check the bolts and ring again, because the bead can settle as the tire warms up.

  • Clean the bead seat before mounting
  • Watch the bead line on both sides during mounting
  • Re-check ring bolts after the first short run

Specifications

Brand Method Race Wheels
Part number MRWSPC1418-H
Rim size 14 inches
Bead allowance increase 1/8 inch (0.125 inch)
Type Beadlock spacer kit
Application 14-inch UTV beadlock wheels

Vehicle fitment

Fitment is set by rim size and beadlock design rather than by vehicle. Check the wheel’s bead and rim diameter before ordering.

The 15-inch and 17-inch spacers are a separate kit with a 3/16 inch (0.1875 inch) increase. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One spacer kit.

Not included: the wheel and tire.

Questions & Answers

Which wheel size is the SPC1418-H spacer for?

It is for 14-inch beadlock wheels. Method's 15-inch and 17-inch spacers add 3/16 inch (0.1875 inch) of bead allowance instead, so use the size that matches your rim.

What problem does a beadlock spacer solve?

When an excessively thick tire bead causes assembly issues, a spacer adds bead allowance. Method cites bolt heads shearing off at low torque values as an example.

Do light truck tires on UTV beadlock wheels need a spacer?

Yes. Light truck tires on UTV beadlock wheels typically call for a spacer kit, and a bead that is too thick to seat may need one. Check the tire bead for uneven thickness before mounting.

What should I check before mounting a tire on a beadlock?

Check the bead for uneven thickness, confirm the wheel size, and clean the bead seat. Seat the bead slowly and check the ring and bolts again after the first short run.

Can a spacer be used on a 15-inch wheel?

No. This kit is sized for 14-inch wheels. Match the spacer to your rim diameter and beadlock design before ordering.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon