Select your vehicle

Method Race Wheels 15″ Beadlock Spacer Kit – SPC15316

Method Race Wheels

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Method Race Wheels 15-inch beadlock spacer kit, part number MRWSPC15316
  • Increases bead allowance by 3/16 inch (0.1875 inch) for 15-inch beadlock wheels
  • Helps thick tire beads that cause assembly problems
  • Match the kit to your wheel size, not a vehicle

Description

Overview

The Method Race Wheels 15-inch beadlock spacer kit (part number MRWSPC15316) adds 3/16 inch (0.1875 inch) of bead allowance on 15-inch beadlock wheels. Method’s beadlock spacers are for tire beads that are too thick, which cause assembly trouble.

Method’s example of that trouble is bolt heads shearing off at low torque values. The brand also says UTV beadlock wheels typically need spacer kits for light truck tires, and that truck wheels on the Method V.1 beadlock ring usually need them for tires 37 inches and up.

Key features

  • 3/16 inch (0.1875 inch) bead allowance increase
  • Made for thick tire beads that cause assembly problems
  • The same 3/16 inch (0.1875 inch) increase applies to 17-inch beadlock spacers.

Choosing the right spacer size

Spacer kits are sized to the rim diameter, so the first step is confirming the wheel size and beadlock design. A kit made for one diameter will not suit another, even when the tire looks like it fits. Check the rim markings and the bead seat before ordering, and keep the wheel’s details with the tire paperwork for future mounting.

Once the size is confirmed, mount the tire with care. Watch both beads as the tire is inflated, and check the ring and bolts after the first short run. If a thick bead continues to fight the bolts, stop and reassess instead of increasing torque beyond the specification, since sheared bolt heads are a serious problem on beadlock setups.

  • Confirm rim diameter and beadlock design first
  • Keep wheel details with tire paperwork
  • Re-check ring bolts after the first short run

Specifications

Brand Method Race Wheels
Part number MRWSPC15316
Rim size 15 inches
Bead allowance increase 3/16 inch (0.1875 inch)
Type Beadlock spacer kit

Vehicle fitment

Fitment is matched by rim diameter rather than by vehicle. Check the wheel size before ordering.

Method’s 14-inch spacer uses a smaller 1/8 inch (0.125 inch) increase. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm the tire bead before mounting, and use the spacer only when a thick bead keeps the tire from seating.

What’s included

One spacer kit.

Not included: the wheel and tire.

Questions & Answers

How much bead allowance does the 15-inch spacer add?

Method says 15-inch and 17-inch beadlock spacers increase bead allowance by 3/16 inch (0.1875 inch). The 14-inch kits add 1/8 inch (0.125 inch) instead.

Does a 15-inch spacer kit fit 14-inch wheels?

No. The kit is sized for 15-inch rims. Method's 14-inch spacer kits are separate products, so pick the one that matches your wheel diameter.

When do truck wheels need spacers?

Method says truck wheels using the V.1 beadlock ring typically need spacer kits when mounting tires 37 inches and up. Check the bead before mounting any tire.

How do I know if my wheels are beadlock?

Look for a clamping ring and bolts around the outer edge of the wheel that hold the tire bead. If the wheel has no ring and bolt arrangement, it is not a beadlock design and this spacer kit does not apply.

Can I use a spacer if the tire bead is loose?

A spacer is for beads that are too thick to seat, not for loose beads. If a bead is loose or damaged, replace the tire or wheel component rather than adding a spacer.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon