Overview
The Low Range Offroad leaf spring bolt kit (part number LROSSP-BK4) is a set of bolts for Samurai leaf springs fitted with aftermarket shackles. The factory spring bolt on a Samurai is 12mm, while aftermarket shackles use 1/2 inch holes.
These bolts are made for aftermarket shackles and Energy Suspension shackle bushings. On a Samurai, the fixed mount end must be drilled out to 1/2 inch to use them with aftermarket shackle bushings.
Key features
- Bolts for aftermarket shackles with 1/2 inch holes
- Designed for use with Energy Suspension shackle bushings
- Fixed spring end requires drilling out to 1/2 inch on the Samurai
- Four bolt kits needed per fixed spring end with aftermarket shackles
Spring bolt wear and inspection
Spring bolts and shackle pins carry shear and bending loads, so they are worth inspecting whenever the springs are off the truck. Look for grooves, flat spots or rust on the shank, and check that the bolt head is seated fully against the bracket. Worn bolts can allow the spring eye to shift, which changes axle location and can make the steering feel loose.
When bolts are replaced with a different diameter, the hole in the bracket and bushing must match. Reaming a hole larger than needed weakens the bracket, so measure the bushing and bolt before drilling. Use new nuts and check torque after the first drive.
- Replace bolts with grooves or rust pitting
- Measure the bushing before any hole work
- Recheck nut torque after the first drive
Specifications
| Brand | Low Range Offroad |
|---|---|
| Part number | LROSSP-BK4 |
| Factory spring bolt | 12mm, on the Samurai |
| Aftermarket shackle holes | 1/2 inch |
| Fitment | Universal fit |
Vehicle fitment
These bolts are sold as universal fit and reference the Samurai only. A model name without a year is not enough to confirm fit, so check bolt size and hole diameter against your spring and shackle before ordering.
No year or chassis code is given for this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
On a Samurai, the fixed mount end is drilled out to 1/2 inch when these bolts are used with aftermarket shackle bushings. A whole Samurai takes 12 bolt kits, and 4 kits cover the fixed spring end when aftermarket shackles are already installed.
What’s included
Leaf spring bolts for aftermarket shackles.









