Overview
The Warrior 90306A is a greaseable shackle bolt measuring 7/16 inch by 5 inch, with no sleeves. It is part number 90306A from the Warrior brand. Shackle bolts secure the shackle at the end of a leaf spring, so the fit depends on your spring pack.
Key features
- Greaseable bolt design
- 7/16 inch by 5 inch dimensions
- No sleeves included
- Warrior brand, part number 90306A
Shackle bolt basics
A shackle bolt connects the shackle to the leaf spring and carries the spring’s movement as the axle travels over bumps. Because it pivots under load, the bolt and the bore around it wear over time, which can show up as clunking, uneven ride height or a loose-feeling rear end. Greasing the bolt helps reduce friction and corrosion at the contact surfaces, but only if the grease fitting and channel are clean and open.
When choosing a replacement, measure the old bolt’s diameter, length and thread before anything else, and compare the head style and nut type. Sleeves are often used to match bore sizes, so check whether your bushings or bracket need one. Replace the nut with a new one where the original requires it, and tighten it to the value given in your service information. After a few drives, recheck the nut and look for fresh grease at the bolt.
- Clean the grease channel before greasing
- Check the bushing bore for play at the same time
- Inspect the bolt head and threads for wear
Specifications
| Brand | Warrior |
|---|---|
| Part number | 90306A |
| UPC | 70000512582 |
| Size | 7/16 inch by 5 inch |
| Greaseable | Yes |
| Sleeves | None |
Vehicle fitment
Fitment depends on your spring pack, so measure the diameter and length of the existing shackle bolt before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Sleeves are not included with the bolt.









