Overview
The Crown Automotive 4007393 is a front shackle spring bolt for leaf springs. It is sold by Crown Automotive, which describes itself as a maker and distributor of replacement parts for Jeep vehicles.
The bolt fits the front position of the spring shackle. Check the application against your leaf spring setup before ordering.
Key features
- Fits the front spring shackle position
- Replacement shackle bolt from Crown Automotive
- Carries part number 4007393 for cross-reference
- Crown Automotive says its replacement parts carry an exceptional warranty
Shackle bolt wear and bushings
A shackle bolt connects the leaf spring to the shackle, and it moves each time the suspension cycles. The bolt, bushings and sleeve share the load, so wear in one part often shows up as play in the others. Look for rust at the threads, flattened bushings and grease that has been pushed out of the joint.
Before replacing a shackle bolt, support the axle so the spring is not loaded, then remove the nut and check the frame and shackle holes for elongation. Clean the threads, apply grease where the design calls for it, and tighten the nut once the vehicle is back on the ground. A bent or worn bolt should not be reused.
- Check the bushings for splitting
- Inspect the holes for elongation
- Clean and grease the joint
- Recheck the nut after a few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4007393 |
| UPC | 848399002775 |
| Position | Front |
Vehicle fitment
The bolt is a direct fit part, so compare it against your existing front shackle bolt before ordering.
Confirm your vehicle’s year, model and trim before ordering.









