Overview
The Tuff Country 54051 is a 4 inch lift kit for the 2016–2018 Nissan Titan XD. The kit centers on Uni-Ball upper control arms, which provide the 4 inch lift at the front of the truck. It fits the PRO-4X, Platinum Reserve, S, SL and SV trims.
The kit is designed to replicate the factory ride and keep off-road durability and performance. This version is installed with the truck’s existing shocks, so the shock length needs checking after the lift.
Key features
- 4 inch lift height
- Uni-Ball upper control arms
- Designed to replicate the factory ride
- Limited lifetime warranty
Shock length after lifting
Shock length is the first thing to think about after a front lift. The shock must reach its full extension and compression without bottoming out, and a lift that changes ride height can change how the shock sits in its mounts. Measure the existing shocks before the install and compare them with the new geometry so the bushings and mounts line up.
Suspension parts that are often replaced alongside lift arms include the front ball joints, sway bar end links and the steering components on the affected side. Replacing worn parts while the front end is already apart saves time later. Inspect the bump stops and check the brake hoses for stretch, since the new suspension position can change how they sit. Keep a written record of what was replaced.
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 54051 |
| UPC | 698815540516 |
| Lift | 4 inch |
| Upper control arms | Uni-Ball |
| Warranty | Limited lifetime |
Vehicle fitment
It is a direct fit for the 2016–2018 Nissan Titan XD, including PRO-4X, Platinum Reserve, S, SL and SV models.
Model years outside 2016–2018 are not covered. Check that your year, model and trim match this kit before ordering.
Installation notes
The upper control arms change the front geometry, so the alignment should be checked after installation. Confirm the shock length for the 4 inch lift before installing the kit with the existing shocks.
What’s included
The Uni-Ball upper control arms are the main component of the 4 inch lift.









