Overview
The Tuff Country 54916 is a 4 inch upper control arm lift for the Toyota 4Runner 4WD. It fits the 2010–2018 4Runner in the Limited, SR5, TRD Off-Road, TRD Pro and Trail trims. The upper control arms are available as a standard ball joint design or a Uni-Ball version.
The kit allows the 4Runner to fit tires up to 33 inches. The Uni-Ball control arms add suspension travel and are designed for durability.
The rear uses extended coil springs that lift the rear end 2.25 inches to level the vehicle. The kit also includes a strut pre-load spacer, a strut spacer and rear shock extension brackets.
Key features
- 4 inch lift for the 4Runner 4WD
- Upper control arms with ball joints
- Strut pre-load spacer and strut spacer
- Rear shock extension brackets
- Rear coil springs that lift the rear 2.25 inches
- Recommended tire size 33 x 12.5
Choosing a control arm style
Upper control arm lifts come in a standard ball joint design and a Uni-Ball version, and the choice affects how the front suspension articulates. Uni-Ball joints allow greater movement, which many off-road drivers prefer, while ball joints are simple to service and often less costly to maintain over time. Consider how the truck will be driven before choosing.
Whichever style is chosen, the joints should be checked for play, cracked boots and binding at regular intervals. Rear coil springs and strut spacers work with the arms, so inspect them for sag and wear. Off-road use with larger tires puts more load on every joint, so inspect the front end more often after trail trips. Greasing and boot checks are simple steps that extend joint life.
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 54916 |
| UPC | 698815549168 |
| Lift | 4 inch |
| Rear lift | 2.25 inch, from rear coil springs |
| Drive | 4WD |
| Recommended tire size | 33 x 12.5 |
| Control arms | Ball joint, or Uni-Ball option |
Vehicle fitment
It fits the 2010–2018 Toyota 4Runner, including Limited, SR5, TRD Off-Road, TRD Pro and Trail models.
Check the model year and 4WD configuration against your truck before ordering, and confirm the year, model and trim as well.
Installation notes
Upper control arm lifts change the front geometry, so check the alignment after installation. The rear shock extension brackets change the shock mounts, so confirm the shock length and travel after the lift.
What’s included
The kit includes upper control arms with ball joints, a strut pre-load spacer, a strut spacer, rear shock extension brackets, rear coil springs and the necessary hardware.









