Overview
The K&N 57-9031 is a 57i Series induction kit, an air intake that includes an air filter, heat shield and tubing. K&N says its intakes completely replace the factory airflow assembly, including the filter, air box and air path.
The kit is a direct fit, and its estimated gain is 5.87 HP at 5080 RPM.
Key features
- 57i Series induction kit
- Includes air filter, heat shield and tubing
- Replaces the factory filter, air box and air path.
- Estimated horsepower gain 5.87 HP at 5080 RPM
- Direct fit
Intake airflow and tuning
An air intake changes the path air takes to the engine, so the mass airflow sensor sees a different flow pattern. Many drivers notice a change in throttle response after a new intake is fitted, and the engine computer adjusts to that new airflow over time.
Filter maintenance is part of owning an oiled gauze intake. Dirt builds up on the filter over time, so clean and re-oil it at regular intervals and inspect the seal each time. Too much oil can drip toward the sensor, so apply it lightly.
Heat shields help keep intake air cooler, which can improve consistency. Check that the shield sits clear of hot components and that the tubing does not rub against the engine bay or the battery cables.
- Clean and re-oil the filter at regular intervals
- Keep oil away from the mass airflow sensor
- Check tubing for rubbing or cracks
- Watch for check engine lights after the first drive
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-9031 |
| UPC | 24844359162 |
| Part type | Air intake (induction) kit |
| Series | 57i Series |
| Estimated horsepower gain | 5.87 HP at 5080 RPM |
| Included | Air filter, heat shield, tubing |
| Fit type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
The horsepower figure is K&N’s estimate for the application it was tested on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the installation steps provided with the kit, and torque all fasteners to the specified values. Check hose routing, clamps and clearance, and disconnect the battery before removing sensors. Check for leaks and warning lights after installation, and review local emissions rules before modifying the intake.
What’s included
- Air filter
- Heat shield
- Tubing














