Overview
The K&N 57-2573 is a 57 Series performance air intake kit for the 2006–2008 Ford Explorer in the Eddie Bauer, Limited and XLT trims. It is a cold air intake with a partial enclosure filter housing, an inlet tube and an oil-type filter.
The kit replaces the factory filter, air box and air path as one unit.
Key features
- Cold air intake system type
- Partial enclosure filter housing
- Inlet tube included with the kit
- Oil filter type
- Direct fit design for the listed Explorer trims
Cold air intake maintenance
This kit uses an oil-type filter inside a partial enclosure, so routine checks focus on the element and its seal. Remove the filter during service, look for dirt that has passed the media, and clean it with the correct cleaner before re-oiling. Let it dry completely before the intake goes back on the vehicle.
Keep the inlet tube clear of heat sources and road spray, since the intake works best with clean air. Check the tube joints and the housing clamps after the first few drives, and again after deep water or muddy trails. Loose joints can let unfiltered air bypass the filter, which shortens engine life.
- Inspect the filter at each oil change
- Recheck tube joints and clamps after first drives
- Keep the inlet clear of splash and debris
- Replace damaged or torn filter media
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | K/N57-2573 |
| Intake system type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006–2008 Ford Explorer in the Eddie Bauer, Limited and XLT trims.
Ford F-150 models and Explorer model years outside 2006–2008 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The inlet tube is included. Check the rest of the kit contents against your installation before starting.









